{"title":"CLASSICBOND PRO","description":"\u003cdetails style=\"margin: 0 0 16px 0; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n  \u003csummary style=\"cursor: pointer; font-weight: 700; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003e\n    Learn more\n    \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n    \u003cp\u003e\u003cstrong\u003eClassicBond Pro EPDM Rubber Roofing System\u003c\/strong\u003e\u003c\/p\u003e\n    \n    \u003cp\u003eClassicBond Pro is a fleece-backed EPDM rubber roofing system designed for commercial flat roofs, overlays and larger installations.\u003c\/p\u003e\n    \n    \u003cp\u003eThe bonded fleece layer makes it tougher than standard EPDM, with improved tear and puncture resistance, while also reducing shrinkage and improving long-term stability.\u003c\/p\u003e\n    \n    \u003cp\u003eBuilt for trade use, it simplifies detailing and helps speed up installation on site.\u003c\/p\u003e\n    \n    \u003cp\u003eThis collection includes ClassicBond Pro membranes, adhesives and compatible accessories required to complete a full \u003cstrong\u003eEPDM rubber roofing system\u003c\/strong\u003e.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","products":[{"product_id":"classicbond-epdm-water-based-deck-adhesive","title":"ClassicBond EPDM Water Based Deck Adhesive for Rubber Roofing","description":"\u003ch3\u003eWater-Based Deck Adhesive for EPDM Rubber Roofing\u003c\/h3\u003e\n\u003cp\u003eClassicBond EPDM Water Based Adhesive is a non-flammable, water-based acrylic adhesive used to bond EPDM rubber roofing membranes to flat timber roof decks, such as OSB3 and plywood.\u003c\/p\u003e\n\u003cp\u003eIt is designed for large flat areas of the roof deck, where a smooth, controlled bond is required without strong odours or solvents. Applied as a one-sided, wet lay adhesive, it allows the EPDM membrane to be positioned easily before being pressed down and fully bonded for a strong, long-term hold.\u003c\/p\u003e\n\u003cdetails style=\"margin-bottom: 12px; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: bold; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003eWhat This Adhesive Is Used For \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n\u003cp\u003eClassicBond Water Based Adhesive is used to bond \u003ca href=\"\/collections\/classicbond-epdm\"\u003e\u003cstrong\u003eClassicBond\u003c\/strong\u003e\u003c\/a\u003e \u003cstrong\u003e\u003ca href=\"\/collections\/classicbond-epdm\"\u003eEPDM rubber roofing\u003c\/a\u003e\u003c\/strong\u003e to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTimber roof decks (OSB3 or plywood)\u003c\/li\u003e\n\u003cli\u003eThe main field area of flat roofs\u003c\/li\u003e\n\u003cli\u003eResidential flat roofs, garages, porches, garden rooms and extensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn timber decks, it is typically used:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAcross the main roof area\u003c\/li\u003e\n\u003cli\u003eWith \u003ca href=\"\/products\/classicbond-epdm-contact-adhesive-for-rubber-roofs\"\u003e\u003cstrong\u003eClassicBond Contact Adhesive\u003c\/strong\u003e\u003c\/a\u003e used separately at edges, upstands and details\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis combination provides a secure, compliant EPDM installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 12px; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: bold; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003eWhy Use Water Based Adhesive for EPDM Roofing \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n\u003cp\u003eWater-based adhesive is the preferred choice for flat timber decks because it offers:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow odour and non-flammable application\u003c\/li\u003e\n\u003cli\u003eA longer working time for positioning the membrane\u003c\/li\u003e\n\u003cli\u003eControlled bonding over large areas\u003c\/li\u003e\n\u003cli\u003eStrength that develops over time\u003c\/li\u003e\n\u003cli\u003eA safer, more comfortable installation - Easier for DIY, Faster for trade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 12px; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: bold; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003eSuitable Surfaces \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n\u003cp\u003eClassicBond Water Based Adhesive is suitable for bonding EPDM rubber roofing to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOSB3 boards\u003c\/li\u003e\n\u003cli\u003ePlywood (Structural Grade)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll boards must:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBe clean, dry and sound\u003c\/li\u003e\n\u003cli\u003eBe free from waxes, sealers or non-absorbent coatings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for non-porous surfaces\u003c\/strong\u003e such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMetal\u003c\/li\u003e\n\u003cli\u003eExisting GRP\u003c\/li\u003e\n\u003cli\u003eSealed or low-vapour-permeable decks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor these surfaces, \u003ca href=\"\/products\/classicbond-epdm-contact-adhesive-for-rubber-roofs\"\u003e\u003cstrong\u003eClassicBond Contact Adhesive\u003c\/strong\u003e\u003c\/a\u003e should be used as the deck adhesive instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEPDM should never be bonded directly to felt or other bituminous substrates.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 12px; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: bold; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003eHow the Adhesive Is Applied (Simple Overview) \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n\u003cul\u003e\n\u003cli\u003eApply using a medium-pile roller\u003c\/li\u003e\n\u003cli\u003eSpread evenly at approx. 3–4 m² per litre\u003c\/li\u003e\n\u003cli\u003eLay the EPDM membrane into the wet adhesive\u003c\/li\u003e\n\u003cli\u003eAfter applying the adhesive, you have roughly 5–15 minutes to lay the membrane into it, depending on temperature and weather conditions\u003c\/li\u003e\n\u003cli\u003ePress and consolidate with a broom or roller to ensure full transfer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe adhesive must \u003cstrong\u003enot\u003c\/strong\u003e be used below \u003cstrong\u003e4°C\u003c\/strong\u003e, or if temperatures are expected to fall below this during curing\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 12px; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: bold; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003eImportant Installation Notes \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStir thoroughly before use\u003c\/li\u003e\n\u003cli\u003eApply to one surface only (deck)\u003c\/li\u003e\n\u003cli\u003eEnsure full adhesive transfer to the membrane\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 12px; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: bold; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003eCoverage \u0026amp; Sizes \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n\u003cp\u003eApproximate coverage:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.0L\u003c\/strong\u003e – covers approx. \u003cstrong\u003e3–4 m²\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5L\u003c\/strong\u003e – covers approx. \u003cstrong\u003e7–10 m²\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.0L\u003c\/strong\u003e – covers approx. \u003cstrong\u003e15–20 m²\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10L\u003c\/strong\u003e – covers approx. \u003cstrong\u003e35–40 m²\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15L\u003c\/strong\u003e – covers approx. \u003cstrong\u003e50–60 m²\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCoverage may vary depending on surface texture and porosity.\u003c\/p\u003e\n\u003cp\u003eFor roofs \u003cstrong\u003eover 100 m²\u003c\/strong\u003e, ClassicBond Contact Adhesive should be used as the deck adhesive instead of water-based adhesive.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 12px; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: bold; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003eProduct Details \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e ClassicBond EPDM Water Based Adhesive (WBA)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Acrylic resin, non-flammable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Cream\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Approx. 3–4 m² per litre\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTack \/ open time:\u003c\/strong\u003e Approx. 5–30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life:\u003c\/strong\u003e 12 months (stored between 5°C and 30°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e One-sided, wet-lay deck adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 12px; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: bold; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003eA Roofer’s Perspective \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n\u003cp\u003eWater-based adhesive is what makes large EPDM roofs easier to install. It gives you working time to position the sheet, work cleanly, and achieve a smooth finish without fighting solvents or fumes.\u003c\/p\u003e\n\u003cp\u003eUsed on the main deck area - with contact adhesive at the edges - it’s the simplest and most reliable way to install EPDM rubber roofing on timber roofs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"1L","offer_id":56479245566283,"sku":"CB-WBA-01","price":13.2,"currency_code":"GBP","in_stock":true},{"title":"2.5L","offer_id":56479245599051,"sku":"CB-WBA-025","price":36.24,"currency_code":"GBP","in_stock":true},{"title":"5L","offer_id":56479245631819,"sku":"CB-WBA-050","price":65.4,"currency_code":"GBP","in_stock":true},{"title":"15L","offer_id":56479245664587,"sku":"CB-WBA-150","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/Classicbond-epdm-water-based-adhesive-all-sizes.jpg?v=1773493446"},{"product_id":"classicbond-epdm-external-corner-patch","title":"ClassicBond EPDM External Corner Patch","description":"\u003ch3\u003eUncured EPDM Patch for External Corners \u0026amp; Upstands\u003c\/h3\u003e\n\n\u003cp\u003eThe ClassicBond External Corner Patch is a pressure-sensitive, uncured EPDM flashing patch used to waterproof external corners, upstands and complex details on EPDM rubber roofing systems.\u003c\/p\u003e\n\n\u003cp\u003eMade from the same uncured Elastoform EPDM flashing used in \u003ca href=\"\/products\/classicbond-9-elastoform-epdm-flashing-tape\"\u003e\u003cstrong\u003eClassicBond 9″ tape\u003c\/strong\u003e\u003c\/a\u003e, the patch is highly flexible and self-curing, allowing it to stretch and mould tightly around corner profiles where standard cured EPDM membrane cannot be dressed reliably, without cutting or folding.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What This External Corner Patch Actually Is\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThis patch is a pre-cut section of 9\" ClassicBond PS uncured Elastoform flashing tape.\u003c\/p\u003e\n    \u003cp\u003eIn practical terms:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eManufactured from uncured EPDM membrane\u003c\/li\u003e\n      \u003cli\u003eLaminated to a pressure-sensitive adhesive backing\u003c\/li\u003e\n      \u003cli\u003eSupplied as a 300mm × 225mm (12″ × 9″) patch\u003c\/li\u003e\n      \u003cli\u003eEquivalent to a short length cut from a roll of 9″ uncured flashing tape\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIt’s designed as a convenient pre-cut solution when you only need to form one or two external corners, without purchasing a full roll of tape.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    When to Use an External Corner Patch\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThis uncured EPDM corner patch is ideal for:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eExternal corners on EPDM roofs\u003c\/li\u003e\n      \u003cli\u003eUpstands up to approx. 150mm\u003c\/li\u003e\n      \u003cli\u003eCorners at:\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003col\u003e\n      \u003cli\u003eRoof perimeters\u003c\/li\u003e\n      \u003cli\u003eParapet walls\u003c\/li\u003e\n      \u003cli\u003eSkylights\u003c\/li\u003e\n      \u003cli\u003eBox gutters\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cul\u003e\n      \u003cli\u003eDetailing work where the membrane needs to stretch over a corner without cutting\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eBecause this EPDM is uncured, it can be shaped smoothly around the corner without creating stress points. The EPDM tape begins to cure when it comes into contact with the \u003ca href=\"\/products\/classicbond-epdm-rubber-roofing-primer\"\u003e\u003cstrong\u003eClassicBond EPDM primer\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    When 9″ Uncured EPDM Tape Is the Better Option\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eIf you have:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\u003cstrong\u003eHigher upstands\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003eMultiple corners\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003eLonger or irregular detailing\u003c\/strong\u003e\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIt’s usually more practical to use ClassicBond 9″ PS uncured Elastoform flashing tape, which can be cut to any length required.\u003c\/p\u003e\n    \u003cp\u003e👉 Think of this patch as a ready-cut convenience option, while uncured tape is the better choice for larger or repeated details.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    How the External Corner Patch Is Installed (Best Practice)\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eClean the membrane surface thoroughly\u003c\/li\u003e\n      \u003cli\u003eIf the membrane is weathered, clean with \u003ca href=\"\/products\/classicbond-epdm-weathered-membrane-cleaner\"\u003e\u003cstrong\u003eWeathered Membrane Cleaner\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n      \u003cli\u003eApply \u003ca href=\"\/products\/classicbond-epdm-rubber-roofing-primer\"\u003e\u003cstrong\u003eClassicBond EPDM Primer\u003c\/strong\u003e\u003c\/a\u003e to the membrane and upstand\u003c\/li\u003e\n      \u003cli\u003eAllow primer to become touch dry\u003c\/li\u003e\n      \u003cli\u003eRound off all corners of the patch using scissors\u003c\/li\u003e\n      \u003cli\u003ePosition the patch and press it firmly into place, stretching it over the corner\u003c\/li\u003e\n      \u003cli\u003eRoll immediately with a seam roller and penny roller, working across the edges (not parallel)\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003e⚠️ \u003cstrong\u003eClassicBond EPDM Primer is required and is not included with this patch.\u003c\/strong\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why Uncured EPDM Flashing Is Used for Corners\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eUncured EPDM flashing:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eHas high elongation (can stretch over 400%)\u003c\/li\u003e\n      \u003cli\u003eIs self-curing once installed\u003c\/li\u003e\n      \u003cli\u003eAdapts easily to irregular shapes and profiles\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThis is why uncured flashing is specified for corners, penetrations at angle changes and complex details in EPDM roofing systems.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eExternal corners are one of the most common failure points on EPDM roofs if the wrong material is used.\u003c\/p\u003e\n    \u003cp\u003eUsing uncured EPDM flashing, rather than cutting and sticking patches of EPDM like we have seen on many failed roofs - whether as a pre-cut patch like this or from a roll of 9″ tape - is the correct, compliant way to ensure a watertight finish. It stretches, beds in properly, and cures into the detail instead of fighting it. Once installed onto primed EPDM, the flashing tape forms a chemical bond with the EPDM rubber roof, forming a long-lasting corner detail.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56483531391307,"sku":"CB-Corner-Patch-Ext","price":7.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/external-corner-patch-for-epdm-rubber-roofing.webp?v=1773495389"},{"product_id":"classicbond-epdm-internal-corner-patch","title":"ClassicBond EPDM Internal Corner Patch","description":"\u003ch3\u003eUncured EPDM Patch for Internal Corners on Wall Edges and L-Shaped Roof Details\u003c\/h3\u003e\n\n\u003cp\u003eThe ClassicBond Internal Corner Patch is an uncured, formable EPDM flashing patch used to waterproof internal corners, returns, and complex junctions on EPDM rubber roofing systems.\u003c\/p\u003e\n\n\u003cp\u003eIt is designed to stretch and mould cleanly into internal angles where cured EPDM membrane cannot be folded or dressed without cutting, making it the correct detailing solution for internal corners on walls, L-shaped roofs and in box gutters.\u003c\/p\u003e\n\n\u003c!-- COLLAPSIBLES --\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What This Internal Corner Patch Actually Is\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThis internal corner patch is made from uncured EPDM, the same material used in ClassicBond 9″ PS Elastoform uncured flashing tape.\u003c\/p\u003e\n    \u003cp\u003eIn practical terms:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eIt is a pre-cut, 6\" section of 9\" uncured EPDM flashing tape\u003c\/li\u003e\n      \u003cli\u003eLaminated to a pressure-sensitive adhesive backing\u003c\/li\u003e\n      \u003cli\u003eSupplied in a size suited to standard internal corners\u003c\/li\u003e\n      \u003cli\u003eDesigned for quick, reliable corner detailing without buying a full metre of tape\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eLike all uncured EPDM flashing, it is self-curing once installed, allowing it to adapt to the detail and form a long-lasting waterproof seal.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    When to Use an Internal Corner Patch\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThis uncured EPDM internal corner patch is ideal for:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eInternal corners where two walls meet\u003c\/li\u003e\n      \u003cli\u003eReturns on upstands\u003c\/li\u003e\n      \u003cli\u003eL-shaped EPDM roof layouts\u003c\/li\u003e\n      \u003cli\u003eInternal corners at:\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003col\u003e\n      \u003cli\u003eWalls\u003c\/li\u003e\n      \u003cli\u003eParapet walls \u0026lt;150mm high\u003c\/li\u003e\n      \u003cli\u003eRoof returns\u003c\/li\u003e\n      \u003cli\u003eBoxed details\u003c\/li\u003e\n      \u003cli\u003eInternal changes in roof direction\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eIt is suitable for \u003cstrong\u003eupstands up to approximately 150mm high\u003c\/strong\u003e.\u003c\/p\u003e\n    \u003cp\u003eUsing uncured EPDM here avoids cutting, folding, or overlapping the main membrane, which can otherwise create potential leak paths.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    When to Use a Longer Length of 9″ Uncured EPDM Tape Instead\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eIf you are dealing with:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\u003cstrong\u003eHigher upstands\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003eMultiple internal corners\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003eLonger internal details\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003eMore complex shapes\u003c\/strong\u003e\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIt is usually more practical to use \u003cstrong\u003eClassicBond 9″ uncured EPDM flashing tape\u003c\/strong\u003e, which can be cut to any length required.\u003c\/p\u003e\n    \u003cp\u003e👉 The internal corner patch is best seen as a ready-cut convenience option, while uncured tape offers more flexibility for larger or repeated details.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    How the Internal Corner Patch Is Installed (Best Practice)\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003eEnsure the membrane surface is clean and dry\u003c\/li\u003e\n      \u003cli\u003eIf weathered, clean with \u003ca href=\"\/products\/classicbond-epdm-weathered-membrane-cleaner\"\u003e\u003cstrong\u003eWeathered Membrane Cleaner\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n      \u003cli\u003eApply \u003ca href=\"\/products\/classicbond-epdm-rubber-roofing-primer\"\u003e\u003cstrong\u003eClassicBond EPDM Primer\u003c\/strong\u003e\u003c\/a\u003e to the membrane and upstand\u003c\/li\u003e\n      \u003cli\u003eAllow primer to become touch dry\u003c\/li\u003e\n      \u003cli\u003eRound off the corners of the patch using scissors\u003c\/li\u003e\n      \u003cli\u003ePosition the patch and press it firmly into the internal corner, stretching it gently to follow the profile\u003c\/li\u003e\n      \u003cli\u003eRoll immediately with a seam roller and penny roller working from the centre outwards\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e⚠️ \u003cstrong\u003eClassicBond Rubber Primer is required\u003c\/strong\u003e and is \u003cstrong\u003enot included\u003c\/strong\u003e with this patch.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eInternal corners are where EPDM detailing can quickly go wrong if the wrong material is used.\u003c\/p\u003e\n    \u003cp\u003eUsing uncured EPDM, whether as a pre-cut internal patch or from a roll of 9″ tape, allows the material to mold around the weak point in the rubber, forming a long-lasting watertight seal.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56483792814411,"sku":"CB-Corner-Patch-Int","price":3.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/Internal-corner-patch-for-epdm-rubber-roofing.jpg?v=1773495044"},{"product_id":"classicbond-epdm-68mm-internal-drain-kit-for-flat-roofs","title":"ClassicBond EPDM 68mm Internal Drain Kit for Flat Roofs","description":"\u003ch3\u003eAnti-Back Up Internal Roof Drain for EPDM Rubber Roofing\u003c\/h3\u003e\n\n\u003cp\u003eThe ClassicBond 68mm Internal Drain Kit is a complete internal drainage solution for EPDM rubber roofing, designed to safely connect drains on flat roofs to standard 68mm UK rainwater pipes while preventing water backing up into the roof system.\u003c\/p\u003e\n\n\u003cp\u003eThis kit uses the ClassicBond Anti-Back Up Roof Drain, combined with uncured EPDM flashing tape and primer, to create a secure, watertight drain detail at one of the most critical points on any flat roof.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why Internal Drains Are a Critical Detail\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eInternal drains are one of the highest-risk areas on a flat roof. If water backs up around the outlet, it can:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eTrack back under the membrane\u003c\/li\u003e\n      \u003cli\u003eSaturate insulation\u003c\/li\u003e\n      \u003cli\u003eCause leaks inside the building\u003c\/li\u003e\n      \u003cli\u003eLead to long-term roof failure\u003c\/li\u003e\n      \u003cli\u003eThis is why anti-back-up protection matters.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThe ClassicBond internal drain is designed specifically to stop water backing up between the outlet and the pipe, protecting the roof build-up below.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003c!-- MOVED UP --\u003e\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Designed for 68mm UK Rainwater Pipes\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThis internal drain kit is intended for:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eFlat roofs with internal drainage\u003c\/li\u003e\n      \u003cli\u003eRoofs connecting to standard 68mm domestic downpipes\u003c\/li\u003e\n      \u003cli\u003eDomestic and commercial EPDM roofs\u003c\/li\u003e\n      \u003cli\u003eWarm and cold roof constructions\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIt is suitable for use with \u003cstrong\u003e\u003ca href=\"\/collections\/classicbond-epdm\"\u003eClassicBond\u003c\/a\u003e, \u003ca href=\"\/collections\/classicbond-pro\"\u003eClassicBond Pro\u003c\/a\u003e and other EPDM membranes\u003c\/strong\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What Makes This Drain “Anti-Back Up”\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThe ClassicBond Anti-Back Up Drain features:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eA smooth 285mm × 285mm flange for excellent EPDM bonding\u003c\/li\u003e\n      \u003cli\u003eA 185mm outlet stem that pushes deep into the pipe\u003c\/li\u003e\n      \u003cli\u003eMultiple compression ribs on the stem that form a tight seal inside the pipe\u003c\/li\u003e\n      \u003cli\u003eA pressure-fit design that prevents water or vapour travelling back into the roof\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eOnce installed, this design eliminates backing up of water, even during heavy rainfall.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why Buy the Complete Kit?\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThis is not just a drain outlet - it’s a complete kit for a compliant, secure, drain installation.\u003c\/p\u003e\n    \u003cp\u003eBuying the kit ensures you have:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eThe correct drain\u003c\/li\u003e\n      \u003cli\u003eThe correct uncured flashing tape\u003c\/li\u003e\n      \u003cli\u003eThe correct primer\u003c\/li\u003e\n      \u003cli\u003eThe correct leaf grate\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eEverything is designed to work together, removing guesswork and reducing installation errors.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What’s Included in the Kit?\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eEach ClassicBond 68mm Internal Drain Kit contains:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\u003cstrong\u003e1 × ClassicBond Anti-Back Up Internal Drain (68mm)\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003e1 × 300mm length of 9″ Uncured EPDM Flashing Tape\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003e1 × 250ml ClassicBond EPDM Primer\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003e1 × Leaf guard\u003c\/strong\u003e\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThis is everything required to form a watertight internal drain detail on an EPDM roof.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    How the Drain Is Installed\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eCut the drain flange back to leave a 50–75mm bonding area\u003c\/li\u003e\n      \u003cli\u003eMechanically fix drain flange into the roof deck\u003c\/li\u003e\n      \u003cli\u003eInstall EPDM membrane over the roof (do not apply deck adhesive to the drain flange)\u003c\/li\u003e\n      \u003cli\u003eCut out the membrane using the flange as a guide\u003c\/li\u003e\n      \u003cli\u003ePrime the flange and surrounding membrane (50mm overlap onto EPDM)\u003c\/li\u003e\n      \u003cli\u003eInstall the uncured EPDM flashing with a minimum 50mm overlap\u003c\/li\u003e\n      \u003cli\u003eCut the centre hole and press flashing tape down inside the outlet\u003c\/li\u003e\n      \u003cli\u003eFit the leaf guard\u003c\/li\u003e\n      \u003cli\u003eThis method ensures a secure seal both on the surface and inside the pipe\u003c\/li\u003e\n    \u003c\/ol\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Product Details\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e ClassicBond 68mm Internal Drain Kit\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDrain type:\u003c\/strong\u003e Anti-Back Up Internal Roof Drain\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Synthetic rubber (IGOM CE)\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFlange size:\u003c\/strong\u003e 285mm × 285mm\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eOutlet length:\u003c\/strong\u003e 185mm\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eOutlet internal size:\u003c\/strong\u003e Approx. 62mm\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDownpipe size:\u003c\/strong\u003e 68mm (UK standard)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eInternal drains are where flat roofs often fail - not because of the membrane, but because of poor outlet detailing.\u003c\/p\u003e\n    \u003cp\u003eUsing an anti-back-up drain with uncured EPDM flashing tape resolves that problem. The outlet seals inside the pipe, the flashing tape seals to the membrane, and water has nowhere to go except down the drain.\u003c\/p\u003e\n    \u003cp\u003eIt’s the most reliable way to detail an internal outlet on an EPDM roof.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56484078125387,"sku":"CB-Drain-68-Drain-Kit","price":39.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/epdm-internal-drain-fitted.jpg?v=1773495883"},{"product_id":"classicbond-horizontal-drain-kit-for-rubber-roofs","title":"ClassicBond Horizontal Drain Kit for Rubber Roofs","description":"\u003ch3\u003eThrough-Wall EPDM Roof Drain for Parapet \u0026amp; Wall Scupper Drainage\u003c\/h3\u003e\n\n\u003cp\u003eThe ClassicBond Horizontal Drain Kit is a complete EPDM roof drainage solution designed to safely drain flat roofs through parapet walls or thick external walls into hoppers, gutters, or downpipes.\u003c\/p\u003e\n\n\u003cp\u003eIt is used where water cannot drain vertically or over the roof edges and must exit the roof horizontally through a wall, forming a secure, watertight outlet at one of the most critical points on the roof.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why Horizontal Drains Are a Critical Roof Detail\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eHorizontal drains (also known as wall scuppers) are often where flat roofs fail if they’re poorly detailed.\u003c\/p\u003e\n    \u003cp\u003eCommon problems include:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eWater backing up behind the outlet\u003c\/li\u003e\n      \u003cli\u003eLeaks where the membrane meets the drain\u003c\/li\u003e\n      \u003cli\u003eMovement between the roof and wall cracking the detail\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThis kit is designed to eliminate those risks by combining a purpose-made horizontal drain with uncured EPDM flashing and primer, so the outlet becomes part of the roof system rather than a weak point.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What Makes This Horizontal Drain Different\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThe ClassicBond horizontal drain is made from \u003cstrong\u003eIGOM synthetic rubber\u003c\/strong\u003e and features:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eA right-angled flange (140mm × 245mm) for secure bonding to the membrane\u003c\/li\u003e\n      \u003cli\u003eA 500mm outlet length, ideal for thick external walls\u003c\/li\u003e\n      \u003cli\u003eA 90mm × 90mm internal outlet size\u003c\/li\u003e\n      \u003cli\u003eCompatibility with 90° shoes and extension pipes\u003c\/li\u003e\n      \u003cli\u003eA supplied leaf guard\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eOnce installed, the outlet forms a continuous, sealed path for water to exit the roof cleanly through the wall.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why Uncured EPDM Flashing Is Used at the Drain\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eUncured EPDM flashing tape is essential for detailing around drains because it:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eStretches easily over corners and edges\u003c\/li\u003e\n      \u003cli\u003eMoulds tightly around the outlet flange\u003c\/li\u003e\n      \u003cli\u003eSelf-cures once installed\u003c\/li\u003e\n      \u003cli\u003eCreates a stress-free, long-lasting seal\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eUsing uncured flashing tape here prevents the lifting that can occur when cured EPDM is cut and folded around drains incorrectly.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What’s Included in the Kit\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eEach ClassicBond Horizontal Drain Kit contains everything required to detail the drain correctly:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\u003cstrong\u003e1 × ClassicBond Horizontal Drain (500mm outlet)\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003e1 × 500mm length of 9″ Uncured EPDM Flashing Tape\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003e1 × EPDM Primer\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003e1 × Leaf guard\u003c\/strong\u003e\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eBuying the complete kit removes guesswork and ensures all components are system compatible.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    How the Horizontal Drain Is Installed (High-Level Overview)\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eMechanically fix the drain securely into the roof deck\u003c\/li\u003e\n      \u003cli\u003eApply bonding adhesive to the outlet flange (leave 50–75mm around the outlet clear)\u003c\/li\u003e\n      \u003cli\u003eInstall the EPDM membrane over the roof\u003c\/li\u003e\n      \u003cli\u003eCut the membrane to expose the outlet flange\u003c\/li\u003e\n      \u003cli\u003ePrime the membrane and drain flange\u003c\/li\u003e\n      \u003cli\u003eInstall uncured EPDM flashing tape to seal the outlet to the membrane\u003c\/li\u003e\n      \u003cli\u003eInstall a secondary flashing collar inside the outlet\u003c\/li\u003e\n      \u003cli\u003eFit the leaf guard\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eThis creates a watertight seal both on the roof surface and inside the outlet pipe.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Product Details\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e ClassicBond Horizontal Drain Kit\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e IGOM synthetic rubber\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eOutlet length:\u003c\/strong\u003e 500mm\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eOutlet internal size:\u003c\/strong\u003e 90mm × 90mm\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFlange size:\u003c\/strong\u003e 140mm × 245mm\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIncludes leaf guard:\u003c\/strong\u003e Yes\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompatible membranes:\u003c\/strong\u003e \u003ca href=\"\/collections\/classicbond-epdm\"\u003e\u003cstrong\u003eClassicBond\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/collections\/classicbond-pro\"\u003e\u003cstrong\u003eClassicBond Pro\u003c\/strong\u003e\u003c\/a\u003e \u0026amp; Other EPDM Membranes\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eHorizontal drains are unforgiving if they’re rushed. If the outlet isn’t sealed properly to the membrane, water will always find its way back in.\u003c\/p\u003e\n    \u003cp\u003eUsing a proper horizontal drain with uncured EPDM flashing tape turns a risky detail into a reliable one. Once it’s installed correctly, it’s a fit-and-forget solution that simply drains water where it should go.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56484128588107,"sku":"CB-Drain-Horizontal-Kit","price":48.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/horizontal-drain-kit-for-rubber-roofing.webp?v=1773496206"},{"product_id":"epdm-internal-drain-outlet-for-flat-roofs","title":"EPDM Internal Drain Outlet for Flat Roofs","description":"\u003ch1\u003eClassicBond Internal Drain Outlet\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eAnti-Back Up EPDM Roof Drain (68mm, 100mm \u0026amp; 110mm)\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe ClassicBond Internal Drain Outlet is a high performance anti back-up roof drain designed to connect EPDM rubber roofing systems directly into internal rainwater pipes that pass through the roof deck.\u003c\/p\u003e\n\n\u003cp\u003eAvailable in 68mm, 100mm and 110mm sizes, this drain is used where the roof drains vertically through the deck, forming a watertight outlet at one of the most critical points on any flat roof.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why Internal Drains Are a Critical Roof Detail\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eInternal roof drains are one of the highest risk failure points on flat roofs. If water backs up around the outlet, it can:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eTrack underneath the membrane\u003c\/li\u003e\n      \u003cli\u003eSaturate insulation\u003c\/li\u003e\n      \u003cli\u003eCause internal leaks\u003c\/li\u003e\n      \u003cli\u003eLead to long-term roof failure\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThis is why anti-back-up protection is essential.\u003c\/p\u003e\n    \u003cp\u003eThe ClassicBond Internal Drain is designed specifically to prevent water or vapour travelling back up between the drain and the inside of the pipe, protecting the roof build-up below.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Available Sizes (Choose the Correct Option)\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThis product is available in three sizes to suit standard UK pipework:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003e68mm\u003c\/strong\u003e – Fits standard domestic 68mm rainwater pipes\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e100mm\u003c\/strong\u003e – Fits standard 100mm pipes\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e110mm\u003c\/strong\u003e – Fits standard 110mm soil or drainage pipes\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eChoosing the correct size ensures a positive pressure fit inside the pipe and proper anti backup performance.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What Makes This Drain “Anti-Back Up”\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eClassicBond internal drains feature:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eA smooth square bonding flange for excellent adhesion to EPDM\u003c\/li\u003e\n      \u003cli\u003eA long outlet stem that pushes deep into the pipe\u003c\/li\u003e\n      \u003cli\u003eMultiple outward-facing compression ribs on the stem\u003c\/li\u003e\n      \u003cli\u003eA pressure-fit seal inside the downpipe\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eWhen inserted correctly, the ribs compress against the pipe wall, forming a tight seal that eliminates water backing up into the roof system or insulation.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What This Product Includes (Important)\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThis listing is for the internal drain outlet only, supplied with a leaf guard.\u003c\/p\u003e\n    \u003cp\u003eIt does NOT include:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/products\/classicbond-9-elastoform-epdm-flashing-tape\"\u003eUncured EPDM flashing\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/products\/classicbond-epdm-rubber-roofing-primer\"\u003eEPDM primer\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThese items are required for correct installation and should be purchased separately.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    How the Internal Drain Is Installed (High-Level Overview)\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eInstallation method is the same for all sizes:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003eTrim the flange to leave a 25–35mm bonding area\u003c\/li\u003e\n      \u003cli\u003eMechanically fix the drain securely into the roof deck\u003c\/li\u003e\n      \u003cli\u003eInstall EPDM membrane over the roof (do not apply deck adhesive to the flange)\u003c\/li\u003e\n      \u003cli\u003eCut the membrane using the flange as a guide\u003c\/li\u003e\n      \u003cli\u003eApply EPDM primer to the flange and surrounding membrane\u003c\/li\u003e\n      \u003cli\u003eInstall 9″ uncured EPDM flashing tape with a minimum 60mm overlap\u003c\/li\u003e\n      \u003cli\u003eCut the centre hole\u003c\/li\u003e\n      \u003cli\u003eRoll firmly to seal flashing to membrane and drain\u003c\/li\u003e\n      \u003cli\u003eInsert the leaf guard\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eThis creates a watertight seal on the surface and inside the pipe.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eMost internal drain failures aren’t caused by the membrane, or the outlet itself - they’re caused by poor outlet detailing.\u003c\/p\u003e\n    \u003cp\u003eUsing an anti back-up internal drain with uncured EPDM flashing tape and primer correctly removes that risk. Once installed properly, water has only one place to go: down the pipe, not back into the roof.\u003c\/p\u003e\n    \u003cp\u003eIt’s one of the most important details to get right on an EPDM roof.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"68mm","offer_id":56496229941579,"sku":"CB-Drain-Int-068","price":23.76,"currency_code":"GBP","in_stock":true},{"title":"100mm","offer_id":56496229974347,"sku":"CB-Drain-Int-100","price":25.44,"currency_code":"GBP","in_stock":true},{"title":"110mm","offer_id":56496230007115,"sku":"CB-Drain-Int-110","price":26.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/epdm-internal-drains-all-sizes.jpg?v=1773496675"},{"product_id":"pipe-boot-for-epdm-rubber-roofing","title":"Pipe Boot for EPDM Rubber Roofing","description":"\u003ch3\u003ePressure-Sensitive Pipe Seal for EPDM Rubber Roofing\u003c\/h3\u003e\n\u003cp\u003eThe ClassicBond EPDM Pipe Boot (PS Pipe Seal) is a pre-moulded, pressure-sensitive EPDM flashing designed to create a watertight seal around pipe penetrations on EPDM rubber roofing systems.\u003c\/p\u003e\n\u003cp\u003eAvailable in two sizes (12–75mm and 25–150mm), it provides a simple, reliable way to waterproof vent pipes, extract ducts and service penetrations without complex cutting or detailing.\u003c\/p\u003e\n\u003cdetails style=\"margin-bottom: 12px; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: bold; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003eWhy Pipe Penetrations Need Special Attention \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n\u003cp\u003ePipe penetrations are one of the most common leak points on flat roofs. If the membrane is cut and folded incorrectly, water can track down the pipe and into the roof build-up.\u003c\/p\u003e\n\u003cp\u003eThe ClassicBond EPDM Pipe Boot solves this by:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStretching tightly around the pipe\u003c\/li\u003e\n\u003cli\u003eBonding securely to the EPDM membrane\u003c\/li\u003e\n\u003cli\u003eAllowing controlled movement without stressing the seal\u003c\/li\u003e\n\u003cli\u003eCreating a clean, professional finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 12px; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: bold; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003eEasier Than Using Pressure-Sensitive Tape Alone \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n\u003cp\u003eWhile it is possible to detail pipe penetrations using pressure-sensitive uncured EPDM tape, it requires:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMultiple pieces of tape\u003c\/li\u003e\n\u003cli\u003eCareful shaping\u003c\/li\u003e\n\u003cli\u003eGreater risk of creases or bubbles\u003c\/li\u003e\n\u003cli\u003eMore time on site\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA pre-moulded EPDM pipe boot is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuicker to install\u003c\/li\u003e\n\u003cli\u003eMore consistent\u003c\/li\u003e\n\u003cli\u003eHarder to get wrong\u003c\/li\u003e\n\u003cli\u003eCleaner in appearance\u003c\/li\u003e\n\u003cli\u003eMore reliable long-term\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt removes guesswork and reduces the risk of detailing errors - especially useful for DIY installers or repetitive site work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 12px; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: bold; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003eAvailable Sizes \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n\u003cp\u003eChoose the correct size based on pipe diameter:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12–75mm Pipe Boot\u003c\/strong\u003e – for smaller vent pipes and service penetrations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25–150mm Pipe Boot\u003c\/strong\u003e – for larger pipes and ducts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe boot is trimmed by cutting just above the raised moulded ring that matches your pipe size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 12px; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: bold; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003eHow the EPDM Pipe Boot Is Installed (Best Practice) \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n\u003col\u003e\n\u003cli\u003eCut the boot to suit the pipe diameter\u003c\/li\u003e\n\u003cli\u003eSlide the boot over the pipe\u003c\/li\u003e\n\u003cli\u003eFit the jubilee clip around the neck of the pipe boot\u003c\/li\u003e\n\u003cli\u003ePrime the membrane area with \u003ca href=\"\/products\/classicbond-epdm-rubber-roofing-primer\"\u003e\u003cstrong\u003eClassicBond EPDM primer\u003c\/strong\u003e\u003c\/a\u003e where the flange will sit\u003c\/li\u003e\n\u003cli\u003eAllow primer to become touch dry\u003c\/li\u003e\n\u003cli\u003ePull the boot back into place\u003c\/li\u003e\n\u003cli\u003eRemove release liner and press flange firmly onto membrane\u003c\/li\u003e\n\u003cli\u003eRoll thoroughly with a seam roller\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFor correct installation, \u003cstrong\u003eEPDM primer is required\u003c\/strong\u003e (not included).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"margin-bottom: 12px; border: 1px solid #333; border-radius: 10px; background: #1a1a1a; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: bold; padding: 16px 48px 16px 16px; font-size: 18px; position: relative; list-style: none;\"\u003eA Roofer’s Perspective \u003cspan style=\"position: absolute; right: 16px; top: 50%; transform: translateY(-50%);\"\u003e▸\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv style=\"padding: 16px; border-top: 1px solid #333;\"\u003e\n\u003cp\u003eYou can build a pipe detail with tape - but it takes longer and leaves more room for error.\u003c\/p\u003e\n\u003cp\u003eA preformed EPDM pipe boot makes the job quicker, neater and more consistent. Once primed and rolled properly, it becomes part of the roof system rather than a weak point.\u003c\/p\u003e\n\u003cp\u003eFor pipe penetrations, it’s simply the smarter way to detail EPDM.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"12-75mm","offer_id":56501103231307,"sku":"CB-Pipe-Boot-Small","price":60.0,"currency_code":"GBP","in_stock":true},{"title":"25-150mm","offer_id":56501103264075,"sku":"CB-Pipe-Boot-Large","price":72.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/EPDM-roofing-pipe-boot.jpg?v=1773568325"},{"product_id":"classicbond-epdm-rubber-roofing-primer","title":"ClassicBond EPDM Rubber Roofing Primer","description":"\u003ch3\u003eRubber Roofing Primer for Flashing, Tapes \u0026amp; Accessories\u003c\/h3\u003e\n\n\u003cp\u003eClassicBond EPDM Primer is a one-step cleaner and primer used to prepare EPDM rubber roofing membranes before applying pressure-sensitive tapes and accessories.\u003c\/p\u003e\n\n\u003cp\u003eIt is essential for achieving strong, long-lasting adhesion when installing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/classicbond-9-elastoform-epdm-flashing-tape\"\u003e9″ Uncured EPDM Flashing\u003c\/a\u003e\u003c\/strong\u003e (Elastoform)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/products\/classicbond-6-epdm-cover-tape\"\u003e6″ Cover Tape\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/products\/classicbond-3-epdm-rubber-roofing-seam-tape\"\u003e3″ Splice Tape\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/products\/pipe-boot-for-epdm-rubber-roofing\"\u003ePipe Boots\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/epdm-internal-drain-outlet-for-flat-roofs\"\u003eInternal\u003c\/a\u003e\u003c\/strong\u003e \u0026amp; \u003cstrong\u003e\u003ca href=\"\/products\/horizontal-roof-drain-for-epdm-rubber-roofing-systems\"\u003eHorizontal Drains\u003c\/a\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/products\/epdm-rubber-walkway-pads\"\u003eWalkway Pads\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eAll pressure-sensitive EPDM accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWithout primer, tapes and flashing will not bond correctly to the membrane.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What This EPDM Primer Does\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eClassicBond EPDM Primer:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eCleans the membrane surface\u003c\/li\u003e\n      \u003cli\u003ePrepares EPDM for pressure-sensitive products\u003c\/li\u003e\n      \u003cli\u003eImproves tape and flashing adhesion\u003c\/li\u003e\n      \u003cli\u003ePromotes strong seam performance\u003c\/li\u003e\n      \u003cli\u003eReduces the risk of splice failure\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIt is designed specifically for use with \u003ca href=\"\/collections\/classicbond-epdm\"\u003e\u003cstrong\u003eClassicBond EPDM systems\u003c\/strong\u003e\u003c\/a\u003e and pressure-sensitive accessories.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Important: What This Primer Is NOT For\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThis primer:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eMust not be used to bond membrane to membrane without splice tape\u003c\/li\u003e\n      \u003cli\u003eIs not a deck adhesive\u003c\/li\u003e\n      \u003cli\u003eShould not be thinned\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIt is used only as part of a correct EPDM seam or flashing detail.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    How It’s Applied (Simple Overview)\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eRemove dirt and debris from the membrane surface\u003c\/li\u003e\n      \u003cli\u003eStir primer thoroughly (minimum 5 minutes recommended)\u003c\/li\u003e\n      \u003cli\u003eApply a thin, even coat to the membrane only\u003c\/li\u003e\n      \u003cli\u003eAvoid puddles or excessive application\u003c\/li\u003e\n      \u003cli\u003eAllow to dry until it does not transfer to a dry finger touch\u003c\/li\u003e\n      \u003cli\u003eInstall splice tape or flashing immediately after flashing off\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003e\u003cstrong\u003eUsing more primer than required does not improve adhesion - full, even coverage is what matters.\u003c\/strong\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Coverage Guide\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eApproximate coverage:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eUp to 47.5 linear metres at 100mm width per 1 litre\u003c\/li\u003e\n      \u003cli\u003eApprox. 3.3 m² per litre\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eExample (250ml tin):\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e~6.5m of 3″ splice tape (both sides)\u003c\/li\u003e\n      \u003cli\u003e~6.5m of 6″ cover tape\u003c\/li\u003e\n      \u003cli\u003e~4.5m of 9″ uncured flashing\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eCoverage will vary depending on application thickness and membrane condition.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Technical Details\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e Synthetic Rubber\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Olive drab to dark grey\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e 727 g\/L\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFlash Point:\u003c\/strong\u003e 4.4°C (Flammable)\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eShelf Life:\u003c\/strong\u003e 9 months (5°C–25°C storage)\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e⚠️ This product is \u003cstrong\u003eflammable\u003c\/strong\u003e and should be used with adequate ventilation.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"250ml","offer_id":56507751104843,"sku":"CB-Primer-025","price":8.4,"currency_code":"GBP","in_stock":true},{"title":"500ml","offer_id":56507751137611,"sku":"CB-Primer-050","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"1L","offer_id":56507751170379,"sku":"CB-Primer-100","price":25.8,"currency_code":"GBP","in_stock":true},{"title":"3.78L","offer_id":56507751203147,"sku":"CB-Primer-378","price":63.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/classicbond-epdm-primer.jpg?v=1773568694"},{"product_id":"classicbond-epdm-lap-sealant-for-rubber-roofing","title":"ClassicBond EPDM Lap Sealant for Rubber Roofing","description":"\u003ch3\u003eSealant for EPDM Rubber Roofing\u003c\/h3\u003e\n\n\u003cp\u003eClassicBond EPDM Lap Sealant is a heavy-bodied, gun-grade rubber sealant used to create a waterproof seal at termination bars and compression-type joints on EPDM rubber roofing systems.\u003c\/p\u003e\n\n\u003cp\u003eIt is designed to seal and protect exposed detailing where the membrane is mechanically secured or compressed, providing a durable, flexible weather barrier.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What Lap Sealant Is Used For\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eClassicBond Lap Sealant is typically used to:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eSeal the top edge of termination bars\u003c\/li\u003e\n      \u003cli\u003eSeal compression-type joints\u003c\/li\u003e\n      \u003cli\u003eSeal the perimeter of a pipe box pocket before pourable sealer is applied\u003c\/li\u003e\n      \u003cli\u003eProtect exposed edges of uncured flashing tape\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIt is used as a finishing and weatherproofing seal, not as a bonding adhesive.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What It Is NOT Used For\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eLap Sealant:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e❌ Is not a splice adhesive\u003c\/li\u003e\n      \u003cli\u003e❌ Is not used to bond membrane to membrane\u003c\/li\u003e\n      \u003cli\u003e❌ Does not replace primer or flashing tape\u003c\/li\u003e\n      \u003cli\u003e❌ Is not a deck adhesive\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIt seals exposed details - it does not create the seam itself.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why Lap Sealant Matters\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eTermination bars and compression joints rely on pressure to hold the membrane in place. The lap sealant:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePrevents water tracking behind the bar\u003c\/li\u003e\n      \u003cli\u003eSeals the exposed membrane edge\u003c\/li\u003e\n      \u003cli\u003eRemains flexible with membrane movement\u003c\/li\u003e\n      \u003cli\u003eHelps protect detailing from long-term weather exposure\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eApplied correctly, it adds an extra layer of protection at critical points on the roof.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Application (Simple Overview)\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eEnsure surfaces are clean and dry\u003c\/li\u003e\n      \u003cli\u003eApply an even bead along the top edge of the termination bar or joint\u003c\/li\u003e\n      \u003cli\u003eLightly tool if required to ensure full contact\u003c\/li\u003e\n      \u003cli\u003eApply before the end of the working day to all required details\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eTypical coverage:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eApprox. \u003cstrong\u003e6–7 linear metres per tube\u003c\/strong\u003e using an 8mm bead\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Product Details\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e ClassicBond EPDM Lap Sealant\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Heavy-bodied rubber sealant\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Cartridge (mastic gun)\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eService temperature:\u003c\/strong\u003e -51°C to 82°C\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Approx. 6.7 linear metres per tube\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eShelf life:\u003c\/strong\u003e 1 year (unopened)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eLap sealant is what finishes a termination properly. The membrane may be mechanically secured, but without sealing the exposed edge, water can track behind it.\u003c\/p\u003e\n    \u003cp\u003eUsed where specified, it completes the detail and protects it from long-term exposure.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56516285890891,"sku":"CB-Lap","price":13.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/classicbond-epdm-lap-sealant.jpg?v=1773569637"},{"product_id":"classicbond-epdm-spray-contact-adhesive-500ml","title":"ClassicBond EPDM Spray Contact Adhesive 500ml","description":"\u003ch3\u003eFast-Drying Aerosol Bonding Adhesive for EPDM Rubber Roofing\u003c\/h3\u003e\n\n\u003cp\u003eClassicBond SPB Spray Contact Adhesive is a high-strength aerosol bonding adhesive designed for fast, clean installation of EPDM rubber roofing membranes.\u003c\/p\u003e\n\n\u003cp\u003eApplied by spray rather than roller, it dramatically reduces application time and drying time compared to traditional brush or roller-applied contact adhesive - making it ideal for upstands, vertical surfaces and detail areas.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why Use Spray Contact Adhesive?\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eCompared to standard \u003ca href=\"\/products\/classicbond-epdm-contact-adhesive\"\u003e\u003cstrong\u003eroller-applied contact adhesive\u003c\/strong\u003e\u003c\/a\u003e, ClassicBond SPB Aerosol Adhesive offers:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\u003cstrong\u003eUp to 6× faster application\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003eUp to 4× faster flash-off time\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003eReduced waiting time before bonding\u003c\/li\u003e\n      \u003cli\u003eCleaner, simpler application\u003c\/li\u003e\n      \u003cli\u003eMore consistent and even coverage\u003c\/li\u003e\n      \u003cli\u003eMinimal product waste\u003c\/li\u003e\n      \u003cli\u003eCoverage of up to \u003cstrong\u003e3m² fully bonded per canister\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIt delivers the same instant grab and bond strength as traditional contact adhesive - but with significantly improved speed and workflow on site.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Where It’s Used\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eClassicBond Spray Contact Adhesive is used to bond EPDM membranes to:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eTimber\u003c\/li\u003e\n      \u003cli\u003eMetal\u003c\/li\u003e\n      \u003cli\u003eMasonry\u003c\/li\u003e\n      \u003cli\u003eConcrete\u003c\/li\u003e\n      \u003cli\u003eInsulation boards (non-bituminous)\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIt is primarily used for:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\u003cstrong\u003eUpstands and vertical surfaces\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003eAngle changes\u003c\/li\u003e\n      \u003cli\u003eDetail areas\u003c\/li\u003e\n      \u003cli\u003e6″ perimeter bonding on standard \u003ca href=\"\/collections\/classicbond-epdm\"\u003e\u003cstrong\u003eClassicBond EPDM\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Important: ClassicBond vs ClassicBond Pro\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eWhen installing:\u003c\/p\u003e\n\n    \u003cp\u003e\u003cstrong\u003eStandard ClassicBond EPDM (non-reinforced):\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eUse spray contact adhesive on upstands\u003c\/li\u003e\n      \u003cli\u003eApply a \u003cstrong\u003e150mm (6″) perimeter strip\u003c\/strong\u003e on the deck to prevent edge lift\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\u003cstrong\u003e\u003ca href=\"\/collections\/classicbond-pro\"\u003eClassicBond Pro (fleece-backed EPDM)\u003c\/a\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eSpray adhesive is recommended for upstands only\u003c\/li\u003e\n      \u003cli\u003eA 6″ perimeter strip on the deck is not required, as the reinforced fleece backing prevents shrinkage-related edge lift\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003eSpray adhesive is particularly effective on \u003cstrong\u003efleece-backed EPDM\u003c\/strong\u003e, as it ensures more even coverage than roller application.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    How It’s Applied (Overview)\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eEnsure surfaces are clean, smooth and dry\u003c\/li\u003e\n      \u003cli\u003eHold can 100–150mm from surface\u003c\/li\u003e\n      \u003cli\u003eSpray adhesive evenly onto \u003cstrong\u003eboth surfaces\u003c\/strong\u003e\n\u003c\/li\u003e\n      \u003cli\u003eAllow adhesive to become \u003cstrong\u003etouch dry\u003c\/strong\u003e\n\u003c\/li\u003e\n      \u003cli\u003eMate surfaces carefully - contact adhesive cannot be repositioned\u003c\/li\u003e\n      \u003cli\u003eRoll firmly to consolidate the bond\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003e⚠️ If bonded while still wet, air bubbles may appear.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Important Limitations\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003eExtremely flammable - keep away from heat and sparks\u003c\/li\u003e\n      \u003cli\u003eDo not use in confined, unventilated spaces\u003c\/li\u003e\n      \u003cli\u003eNot suitable for bonding to bituminous substrates (e.g. felt)\u003c\/li\u003e\n      \u003cli\u003eOnce bonded, membrane cannot be repositioned\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eSpray contact adhesive is about speed and control. On upstands and fleece-backed EPDM, it’s cleaner and more consistent than roller application.\u003c\/p\u003e\n    \u003cp\u003eYou get instant grab, strong bonding, and less time waiting for flash-off - especially useful when working against weather or tight schedules.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56516580344139,"sku":"CB-Spray-005","price":12.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/ClassicBond-epdm-spray-contact-adhesive.jpg?v=1773573237"},{"product_id":"classicbond-spb-sprayable-bonding-adhesive-14l-22l","title":"ClassicBond SPB Sprayable Bonding Adhesive (14L \u0026 22L)","description":"\u003ch3\u003eHigh-Performance Spray Contact Adhesive for EPDM Rubber Roofing (14L \u0026amp; 22L)\u003c\/h3\u003e\n\n\u003cp\u003eClassicBond SPB Sprayable Bonding Adhesive is a gun-applied, high-strength contact adhesive designed to dramatically reduce installation time when bonding EPDM rubber roofing membranes to a variety of substrates.\u003c\/p\u003e\n\n\u003cp\u003eSupplied in \u003cstrong\u003e14L and 22L pressurised canisters\u003c\/strong\u003e, this system is ideal for larger commercial projects and repetitive upstand or detailing work where speed, consistency and efficiency matter.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why Use Sprayable Bonding Adhesive on Larger Roofs?\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eCompared to traditional brush or roller-applied bonding adhesive, ClassicBond SPB:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eIs up to 8× faster to apply\u003c\/li\u003e\n      \u003cli\u003eDries up to 4× faster\u003c\/li\u003e\n      \u003cli\u003eOffers a far greater operational window\u003c\/li\u003e\n      \u003cli\u003eProvides more accurate and even coverage\u003c\/li\u003e\n      \u003cli\u003eReduces manual labour time\u003c\/li\u003e\n      \u003cli\u003eEliminates product wastage\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThis means large EPDM installations can be completed more efficiently, reducing exposure to weather and helping projects stay on schedule.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Designed for Commercial \u0026amp; High-Volume Work\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThe SPB Sprayable Adhesive system is best suited for:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eCommercial EPDM roofing installations\u003c\/li\u003e\n      \u003cli\u003eLarge ClassicBond membrane sheets\u003c\/li\u003e\n      \u003cli\u003eExtensive upstands and vertical surfaces\u003c\/li\u003e\n      \u003cli\u003eDetail-heavy roof layouts\u003c\/li\u003e\n      \u003cli\u003eRepetitive bonding work\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIt is particularly effective when used with \u003ca href=\"\/collections\/classicbond-pro\"\u003e\u003cstrong\u003eClassicBond Pro fleece-backed EPDM\u003c\/strong\u003e\u003c\/a\u003e, as spray application ensures more thorough and consistent coverage on fleece surfaces compared to roller application.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Coverage \u0026amp; Sizes\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eAvailable in:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e14L Canister – up to approx. 60m² coverage\u003c\/li\u003e\n      \u003cli\u003e22L Canister – up to approx. 100m² coverage\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eCoverage varies depending on substrate and application thickness.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Where It’s Used\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eClassicBond SPB Adhesive bonds EPDM rubber roofing to:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eTimber\u003c\/li\u003e\n      \u003cli\u003eConcrete\u003c\/li\u003e\n      \u003cli\u003eBrickwork\u003c\/li\u003e\n      \u003cli\u003eMetal\u003c\/li\u003e\n      \u003cli\u003ePVC\u003c\/li\u003e\n      \u003cli\u003eSuitable insulation boards\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e\u003cstrong\u003eContact Adhesive must be used as the deck adhesive when installing standard \u003ca href=\"\/collections\/classicbond-epdm\"\u003eClassicBond EPDM (1.2mm \u0026amp; 1.5mm)\u003c\/a\u003e on roofs over 100m²\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cp\u003ePrimarily used for:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eUpstands and vertical surfaces\u003c\/li\u003e\n      \u003cli\u003eNon-permeable deck bonding\u003c\/li\u003e\n      \u003cli\u003eDetail areas\u003c\/li\u003e\n      \u003cli\u003eLarge sheet adhesion\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    How It’s Applied\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003eEnsure all surfaces are clean and dry\u003c\/li\u003e\n      \u003cli\u003eHold spray gun approx. 150–200mm from the surface\u003c\/li\u003e\n      \u003cli\u003eApply an even coat to both the membrane and substrate\u003c\/li\u003e\n      \u003cli\u003eAllow adhesive to flash off (minimum 4 minutes, maximum 30 minutes)\u003c\/li\u003e\n      \u003cli\u003eBring surfaces together and roll firmly with a 50mm hand roller\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e\u003cstrong\u003e⚠️ Once bonded, the membrane cannot be repositioned.\u003c\/strong\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Equipment Required\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eTo operate this system you will need:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/products\/classicbond-spray-contact-application-gun\"\u003eSPB Spray Gun \u0026amp; Tip Bundle\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/products\/classicbond-spray-contact-adhesive-hose\"\u003eSPB 4m Spray Hose\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThese are sold separately.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eOn large EPDM roofs, labour time is often the biggest cost.\u003c\/p\u003e\n    \u003cp\u003eSprayable bonding adhesive dramatically reduces application time and waiting time. It provides consistent coverage and reliable bonding strength, especially on fleece-backed membranes where roller application can be uneven.\u003c\/p\u003e\n    \u003cp\u003eFor high-volume or commercial installs, it’s the most efficient way to bond EPDM properly.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"14L","offer_id":56516755226955,"sku":"CB-Spray-140","price":236.4,"currency_code":"GBP","in_stock":true},{"title":"22L","offer_id":56516755259723,"sku":"CB-Spray-220","price":402.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/22l-ClassicBond-EPDM-Spray-Contact-Adhesive.jpg?v=1773573755"},{"product_id":"classicbond-spray-contact-application-gun","title":"ClassicBond SPB Spray Contact Adhesive Application Gun (Tip Included)","description":"\u003ch3 data-end=\"766\" data-start=\"707\"\u003eProfessional Spray Gun for EPDM Rubber Roofing Adhesive\u003c\/h3\u003e\n\u003cp data-end=\"988\" data-start=\"768\"\u003eThe ClassicBond SPB Spray Gun is the dedicated applicator for \u003cstrong data-end=\"884\" data-start=\"830\"\u003eClassicBond SPB Sprayable Contact Bonding Adhesive\u003c\/strong\u003e, designed to deliver fast, controlled, and even adhesive coverage on EPDM rubber roofing installations.\u003c\/p\u003e\n\u003cp data-end=\"1142\" data-start=\"990\"\u003eEach spray gun is supplied with a \u003cstrong data-end=\"1062\" data-start=\"1024\"\u003ecompatible spray tip included free\u003c\/strong\u003e, allowing you to connect directly to your SPB Spray Hose and adhesive canister.\u003c\/p\u003e\n\u003ch2 data-end=\"1203\" data-start=\"1149\"\u003eDesigned for SPB Sprayable Contact Adhesive Systems\u003c\/h2\u003e\n\u003cp data-end=\"1248\" data-start=\"1205\"\u003eThis spray gun is used in conjunction with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1320\" data-start=\"1252\"\u003e\u003cstrong data-end=\"1320\" data-start=\"1252\"\u003eClassicBond SPB Sprayable Bonding Adhesive (14L \u0026amp; 22L canisters)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-end=\"1356\" data-start=\"1323\"\u003e\u003cstrong data-end=\"1356\" data-start=\"1323\"\u003eClassicBond SPB 4m Spray Hose\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1382\" data-start=\"1358\"\u003eIt allows installers to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1431\" data-start=\"1386\"\u003eApply adhesive evenly across large surfaces\u003c\/li\u003e\n\u003cli data-end=\"1479\" data-start=\"1434\"\u003eBond EPDM membranes quickly and efficiently\u003c\/li\u003e\n\u003cli data-end=\"1545\" data-start=\"1482\"\u003eAchieve consistent coverage on upstands and vertical surfaces\u003c\/li\u003e\n\u003cli data-end=\"1603\" data-start=\"1548\"\u003eImprove workflow speed compared to roller application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-start=\"1970\" data-end=\"2033\"\u003eImportant: Correct Pressure Control (Prevents Hose Blockage)\u003c\/h2\u003e\n\u003cp data-start=\"2035\" data-end=\"2102\"\u003eOnce the spray gun and hose are connected to the adhesive canister:\u003c\/p\u003e\n\u003cp data-start=\"2104\" data-end=\"2162\"\u003e⚠️ \u003cstrong data-start=\"2107\" data-end=\"2162\"\u003eLeave the pressure dial on the canister fully open.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"2164\" data-end=\"2235\"\u003ePressure should be controlled \u003cstrong data-start=\"2194\" data-end=\"2234\"\u003eonly using the dial on the spray gun\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"2237\" data-end=\"2376\"\u003eIf the pressure is turned off at the canister while the hose remains connected, adhesive can cure inside the hose, potentially blocking it.\u003c\/p\u003e\n\u003cp data-start=\"2378\" data-end=\"2464\"\u003eCorrect pressure management protects your equipment and prevents unnecessary downtime.\u003c\/p\u003e\n\u003ch2 data-start=\"2471\" data-end=\"2498\"\u003eHow It’s Used (Overview)\u003c\/h2\u003e\n\u003col\u003e\n\u003cli data-start=\"2503\" data-end=\"2534\"\u003eConnect spray gun to SPB hose\u003c\/li\u003e\n\u003cli data-start=\"2538\" data-end=\"2577\"\u003eConnect hose to SPB adhesive canister\u003c\/li\u003e\n\u003cli data-start=\"2581\" data-end=\"2612\"\u003eOpen the canister valve fully\u003c\/li\u003e\n\u003cli data-start=\"2616\" data-end=\"2665\"\u003eAdjust spray pressure using the dial on the gun\u003c\/li\u003e\n\u003cli data-start=\"2669\" data-end=\"2717\"\u003eHold spray head approx. 150–200mm from surface\u003c\/li\u003e\n\u003cli data-start=\"2721\" data-end=\"2761\"\u003eApply adhesive evenly to both surfaces\u003c\/li\u003e\n\u003cli data-start=\"2765\" data-end=\"2809\"\u003eAllow adhesive to flash off before bonding\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-start=\"2811\" data-end=\"2861\"\u003eOnce bonded, EPDM membrane cannot be repositioned.\u003c\/p\u003e\n\u003ch2 data-start=\"2868\" data-end=\"2883\"\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"2887\" data-end=\"2939\"\u003eDesigned specifically for ClassicBond SPB Adhesive\u003c\/li\u003e\n\u003cli data-start=\"2942\" data-end=\"2979\"\u003eSpray tip included at no extra cost\u003c\/li\u003e\n\u003cli data-start=\"2982\" data-end=\"3016\"\u003eFast, even adhesive distribution\u003c\/li\u003e\n\u003cli data-start=\"3019\" data-end=\"3063\"\u003eIdeal for commercial EPDM roofing projects\u003c\/li\u003e\n\u003cli data-start=\"3066\" data-end=\"3118\"\u003eCleaner and more efficient than roller application\u003c\/li\u003e\n\u003cli data-start=\"3121\" data-end=\"3157\"\u003eReduces labour time on large roofs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"3750\" data-end=\"3761\"\u003eSummary\u003c\/h3\u003e\n\u003cp data-start=\"3763\" data-end=\"4053\"\u003eThe ClassicBond SPB Spray Gun is an essential component of the SPB sprayable contact adhesive system for EPDM rubber roofing. Designed for professional use, it ensures fast, controlled and efficient adhesive application on commercial and large-scale projects.\u003c\/p\u003e\n\u003cp data-start=\"4055\" data-end=\"4138\"\u003eFor reliable EPDM bonding using SPB spray adhesive, this is the correct applicator.\u003c\/p\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56516862214475,"sku":"CB-Spray-Gun","price":110.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/classicbond-epdm-contact-adhesive-spray-gun.webp?v=1773573898"},{"product_id":"classicbond-spray-contact-adhesive-hose","title":"ClassicBond SPB Spray Contact Adhesive Hose","description":"\u003ch3 data-start=\"288\" data-end=\"331\"\u003eEPDM Rubber Roofing Spray Adhesive Hose\u003c\/h3\u003e\n\u003cp data-start=\"333\" data-end=\"471\"\u003eThe ClassicBond SPB 4m Spray Hose is designed for use with the \u003cstrong data-start=\"396\" data-end=\"470\"\u003eClassicBond SPB Spray Gun and SPB Sprayable Contact Adhesive canisters\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"473\" data-end=\"656\"\u003eThis hose connects the adhesive canister to the spray gun, allowing controlled application of EPDM rubber roofing spray contact adhesive across larger roof areas and vertical details.\u003c\/p\u003e\n\u003ch2 data-start=\"663\" data-end=\"698\"\u003eWhat This Spray Hose Is Used For\u003c\/h2\u003e\n\u003cp data-start=\"700\" data-end=\"739\"\u003eThe SPB 4m Hose is required when using:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"743\" data-end=\"791\"\u003eClassicBond SPB 14L Sprayable Bonding Adhesive\u003c\/li\u003e\n\u003cli data-start=\"794\" data-end=\"842\"\u003eClassicBond SPB 22L Sprayable Bonding Adhesive\u003c\/li\u003e\n\u003cli data-start=\"845\" data-end=\"872\"\u003eClassicBond SPB Spray Gun\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"874\" data-end=\"988\"\u003eIt enables safe, consistent transfer of adhesive from the canister to the gun for fast and efficient installation.\u003c\/p\u003e\n\u003ch2 data-start=\"1330\" data-end=\"1357\"\u003eImportant Usage Guidance\u003c\/h2\u003e\n\u003cp data-start=\"1359\" data-end=\"1374\"\u003eOnce connected:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1378\" data-end=\"1416\"\u003eKeep the \u003cstrong data-start=\"1387\" data-end=\"1416\"\u003ecanister valve fully open\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1419\" data-end=\"1476\"\u003eControl pressure using the \u003cstrong data-start=\"1446\" data-end=\"1476\"\u003edial on the spray gun only\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1479\" data-end=\"1600\"\u003eDo not close the canister valve while the hose remains connected, as adhesive can cure inside the hose and cause blockage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1602\" data-end=\"1681\"\u003eCorrect pressure management helps protect the hose and extend its working life.\u003c\/p\u003e\n\u003ch3 data-start=\"1911\" data-end=\"1922\"\u003eSummary\u003c\/h3\u003e\n\u003cp data-start=\"1924\" data-end=\"2204\"\u003eThe ClassicBond SPB 4m Spray Hose is an essential component of the SPB spray adhesive system for EPDM rubber roofing. Designed to connect the spray gun to the adhesive canister, it enables fast, controlled and efficient adhesive application on commercial and large-scale projects.\u003c\/p\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56516907991371,"sku":"CB-Spray-Hose","price":75.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/spray-hose-for-epdm-contact-adhesive.webp?v=1773574022"},{"product_id":"classicbond-6-epdm-cover-tape","title":"ClassicBond 6″ EPDM Cover Tape (PS Cured Cover Strip)","description":"\u003ch3\u003ePressure-Sensitive Repair \u0026amp; Cover Strip for EPDM Rubber Roofing - Sold per linear metre\u003c\/h3\u003e\n\n\u003cp\u003eClassicBond 6″ EPDM Cover Tape (PS Cured Cover Strip) is a \u003cstrong\u003epressure-sensitive, fully cured EPDM cover strip\u003c\/strong\u003e used for repairs, abutments and reinforced detailing on EPDM rubber roofing systems.\u003c\/p\u003e\n\n\u003cp\u003eAt 152mm (6″) wide, it provides a strong, durable covering strip where standard \u003ca href=\"\/products\/classicbond-3-epdm-rubber-roofing-seam-tape\"\u003e\u003cstrong\u003e3″ splice tape\u003c\/strong\u003e\u003c\/a\u003e is not suitable - such as patch repairs, end laps on fleece-backed systems, and membrane abutments.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What 6″ Cover Tape Is Used For\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eClassicBond 6″ Cover Tape is designed for:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEPDM patch repairs\u003c\/strong\u003e (cuts, punctures, splits)\u003c\/li\u003e\n      \u003cli\u003eJoining two membranes where there is no 75mm overlap available\u003c\/li\u003e\n      \u003cli\u003eSealing end laps on \u003ca href=\"\/products\/classicbond-pro-fleece-reinforced-epdm\"\u003e\u003cstrong\u003eClassicBond Pro fleece-backed EPDM\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n      \u003cli\u003eTerminating membrane to a lead skirt with ClassicBond Pro where a flat roof meets a pitched or mansard roof\u003c\/li\u003e\n      \u003cli\u003eReinforcing skylight upstands in conjunction with \u003ca href=\"\/products\/classicbond-9-elastoform-epdm-flashing-tape\"\u003e\u003cstrong\u003e9″ Uncured Elastoform Flashing Tape\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why Use 6″ Cover Tape Instead of 3″ Splice Tape?\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003e3″ splice tape is designed for membrane-to-membrane seams with a 75mm overlap.\u003c\/p\u003e\n    \u003cp\u003e6″ cover tape is used when:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eThere is no overlap for a join\u003c\/li\u003e\n      \u003cli\u003eA repair patch is required\u003c\/li\u003e\n      \u003cli\u003eAdditional reinforcement is needed\u003c\/li\u003e\n      \u003cli\u003eSealing fleece-backed EPDM end laps\u003c\/li\u003e\n      \u003cli\u003eCreating a termination onto lead or other substrates\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIt provides a wider, more robust covering strip and is especially useful in repair situations - as weak spots must be covered 3 inches in every direction, a 6 inch width is suited perfectly.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Product Construction \u0026amp; Performance\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eClassicBond 6\" PS Cover Strip is:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eA fully cured EPDM membrane\u003c\/li\u003e\n      \u003cli\u003eWith a factory-applied pressure-sensitive synthetic rubber adhesive\u003c\/li\u003e\n      \u003cli\u003eNominal 2.29mm thick\u003c\/li\u003e\n      \u003cli\u003e152mm (6″) wide x 30.5m roll\u003c\/li\u003e\n      \u003cli\u003eDesigned to resist tearing, flex cracking and weathering\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eBecause it is fully cured, it can handle expansion and contraction without weakening.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    How It’s Installed (Best Practice)\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eEnsure the membrane surface is clean and dry\u003c\/li\u003e\n      \u003cli\u003eRemove dirt and dust; use \u003ca href=\"\/products\/classicbond-epdm-weathered-membrane-cleaner\"\u003e\u003cstrong\u003emembrane cleaner\u003c\/strong\u003e\u003c\/a\u003e if required\u003c\/li\u003e\n      \u003cli\u003eApply \u003ca href=\"\/products\/classicbond-epdm-rubber-roofing-primer\"\u003e\u003cstrong\u003eClassicBond EPDM Primer\u003c\/strong\u003e\u003c\/a\u003e with a scrubbing pad\u003c\/li\u003e\n      \u003cli\u003eAllow primer to flash off (no transfer to dry finger)\u003c\/li\u003e\n      \u003cli\u003ePosition the cover strip and apply firm hand pressure\u003c\/li\u003e\n      \u003cli\u003eImmediately roll with a 50mm steel roller, rolling across the edge\u003c\/li\u003e\n      \u003cli\u003eApply lap sealant where specified (e.g., overlaps or metal joints)\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePrimer must always be used with PS Cover Strip.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Important Notes\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003eMust be used with ClassicBond EPDM Primer\u003c\/li\u003e\n      \u003cli\u003eNot suitable for flashing pipes or corners (use uncured flashing instead)\u003c\/li\u003e\n      \u003cli\u003eStore dry and protect from excessive heat\u003c\/li\u003e\n      \u003cli\u003eFor cold weather installs (below 5°C), heat the primed area during application\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003e3″ splice tape joins sheets.\u003cbr\u003e6″ cover tape fixes problems.\u003c\/p\u003e\n    \u003cp\u003eWhether it’s a patch repair, fleeceback end lap or awkward termination to lead, 6″ cover strip gives you a wider, more forgiving seal. Installed with primer and rolled properly, it becomes part of the membrane system and performs like the original roof.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56518292308299,"sku":"CB-Tape06","price":14.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/6-inch-cover-tape-epdm.jpg?v=1773575175"},{"product_id":"classicbond-9-elastoform-epdm-flashing-tape","title":"ClassicBond 9\" Elastoform EPDM Rubber Roofing Flashing Tape","description":"\u003ch3\u003ePressure-Sensitive Uncured EPDM Tape for Complex Roof Details - Sold per Linear Metre\u003c\/h3\u003e\n\n\u003cp\u003eClassicBond 9″ Elastoform Tape (PS 228mm Uncured Flashing Tape) is a pressure-sensitive, uncured EPDM flashing tape designed for forming watertight details around complex shapes and roof penetrations.\u003c\/p\u003e\n\n\u003cp\u003eUnlike cured EPDM tapes, Elastoform is \u003cstrong\u003emalleable and self-curing\u003c\/strong\u003e, allowing it to stretch and adapt to irregular profiles, corners and outlets without creasing or stressing the membrane.\u003c\/p\u003e\n\n\u003cp\u003eThis makes it the correct solution for critical detailing on EPDM rubber roofing systems.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What 9″ Elastoform Is Used For\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eClassicBond 9″ Uncured EPDM Flashing is ideal for:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eExternal corners\u003c\/li\u003e\n      \u003cli\u003eInternal corners\u003c\/li\u003e\n      \u003cli\u003ePipe penetrations\u003c\/li\u003e\n      \u003cli\u003eDrain outlets (internal and horizontal)\u003c\/li\u003e\n      \u003cli\u003eSkylight upstand corners\u003c\/li\u003e\n      \u003cli\u003eAwkward or irregular detailing\u003c\/li\u003e\n      \u003cli\u003eForming custom pipe boots\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eAnywhere the membrane needs to stretch and form - uncured EPDM is required.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why Uncured EPDM Flashing Is Different\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eBecause the membrane is uncured:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eIt stretches up to \u003cstrong\u003e480% elongation\u003c\/strong\u003e\n\u003c\/li\u003e\n      \u003cli\u003eMoulds easily to irregular shapes\u003c\/li\u003e\n      \u003cli\u003eSelf-cures after installation\u003c\/li\u003e\n      \u003cli\u003eReduces stress points at corners\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThis makes it far superior to trying to fold cured EPDM around complex details.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Installation Overview (Best Practice)\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eEnsure the membrane surface is clean and free from contamination\u003c\/li\u003e\n      \u003cli\u003eApply \u003ca href=\"\/products\/classicbond-epdm-rubber-roofing-primer\"\u003e\u003cstrong\u003eClassicBond EPDM Primer\u003c\/strong\u003e\u003c\/a\u003e using a scrubbing pad\u003c\/li\u003e\n      \u003cli\u003eAllow primer to flash off (no transfer to dry finger)\u003c\/li\u003e\n      \u003cli\u003ePosition the flashing and apply firm, even hand pressure\u003c\/li\u003e\n      \u003cli\u003eImmediately roll with a 50mm roller, rolling across the edge\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003e⚠️ Primer is required for correct adhesion. \u003ca href=\"\/products\/classicbond-epdm-lap-sealant-for-rubber-roofing\"\u003eLap Sealant\u003c\/a\u003e should be used as a secondary seal to exposed edges of uncured tape.\u003c\/p\u003e\n    \u003cp\u003eIn colder conditions (below 5°C), gentle heat may be required during application.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    When to Use 9″ vs 12″ Elastoform\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003e9″ Elastoform is suitable for most:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eStandard upstands\u003c\/li\u003e\n      \u003cli\u003ePipe penetrations\u003c\/li\u003e\n      \u003cli\u003eDrain details\u003c\/li\u003e\n      \u003cli\u003eSkylights\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eFor higher upstands or larger detailing areas, 12″ Elastoform may be more appropriate.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eUncured flashing is what makes EPDM detailing work properly.\u003c\/p\u003e\n    \u003cp\u003eTrying to form corners, pipes or drains with cured membrane alone leads to stress points and failure. Elastoform stretches, beds in cleanly and cures into the detail, making it one of the most important products in the EPDM system.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56518341689675,"sku":"CB-Tape09","price":24.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/9-inch-epdm-flashing-tape.jpg?v=1773575266"},{"product_id":"classicbond-12-uncured-epdm-rubber-roofing-flashing-tape","title":"ClassicBond 12\" Uncured EPDM Rubber Roofing Flashing Tape","description":"\u003ch3\u003eWide Uncured EPDM Flashing Tape for Complex Roof Details - Sold per Linear Metre\u003c\/h3\u003e\n\n\u003cp\u003eClassicBond 12″ Elastoform (305mm) Uncured EPDM Flashing is a \u003cstrong\u003epressure-sensitive, formable EPDM flashing tape\u003c\/strong\u003e designed for larger and more demanding detailing on EPDM rubber roofing systems.\u003c\/p\u003e\n\n\u003cp\u003eWith increased width compared to the 9″ version, it provides additional coverage for \u003cstrong\u003ehigher upstands, larger penetrations and wide membrane cuts\u003c\/strong\u003e, ensuring proper overlap and long-term waterproofing.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    When to Use 12″ Instead of 9″ Elastoform\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eWhile \u003ca href=\"\/products\/classicbond-9-elastoform-epdm-flashing-tape\"\u003e\u003cstrong\u003e9″ uncured flashing\u003c\/strong\u003e\u003c\/a\u003e is suitable for most standard detailing, the 12″ version is recommended when:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eUpstands exceed standard height\u003c\/li\u003e\n      \u003cli\u003eLarger pipe penetrations are present\u003c\/li\u003e\n      \u003cli\u003eInternal or external corners require extra coverage\u003c\/li\u003e\n      \u003cli\u003eDrain detailing requires wider bonding area\u003c\/li\u003e\n      \u003cli\u003eRepairs involve larger damaged sections\u003c\/li\u003e\n      \u003cli\u003eAdditional overlap is required for specification compliance\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThe added width ensures adequate coverage over membrane cuts and weak spots, reducing stress points and improving durability.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Installation Overview\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eEnsure membrane is clean and dry\u003c\/li\u003e\n      \u003cli\u003eApply \u003ca href=\"\/products\/classicbond-epdm-rubber-roofing-primer\"\u003e\u003cstrong\u003eClassicBond EPDM Primer\u003c\/strong\u003e\u003c\/a\u003e to the bonding area\u003c\/li\u003e\n      \u003cli\u003eAllow primer to become touch dry\u003c\/li\u003e\n      \u003cli\u003ePosition the flashing smooth side down\u003c\/li\u003e\n      \u003cli\u003eApply firm hand pressure\u003c\/li\u003e\n      \u003cli\u003eRoll thoroughly using a 50mm steel roller\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePrimer must always be used for correct adhesion. Lap Sealant should be used as a secondary seal to exposed edges of uncured tape.\u003c\/p\u003e\n    \u003cp\u003eIn colder conditions, warming the primed area may assist bonding.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eWhen in doubt, go wider.\u003c\/p\u003e\n    \u003cp\u003eThe 12″ Elastoform gives you more coverage, more forgiveness and better stress distribution on larger details. It’s the right choice when the 9″ width simply doesn’t provide enough overlap.\u003c\/p\u003e\n    \u003cp\u003eFor bigger detailing work, the wider flashing is the safer option.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56518364725579,"sku":"CB-Tape12","price":38.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/12-inch-elastoform-tape-epdm.jpg?v=1773576709"},{"product_id":"classicbond-epdm-water-cut-off-mastic","title":"ClassicBond EPDM Water Cut-Off Mastic","description":"\u003ch3\u003eCompression Sealant for EPDM Termination Bars \u0026amp; Fixings\u003c\/h3\u003e\n\n\u003cp\u003eClassicBond Water Cut-Off Mastic is a \u003cstrong\u003eone-component, extremely tacky butyl-blend sealant\u003c\/strong\u003e designed to create a watertight compression seal in EPDM rubber roofing systems.\u003c\/p\u003e\n\n\u003cp\u003eIt is applied beneath the membrane before mechanical termination, where it seals around fixings under compression - preventing water tracking into screw penetrations or behind termination bars.\u003c\/p\u003e\n\n\u003cp\u003eWhen compressed, the mastic “oozes” into gaps, forming a durable seal that remains flexible long-term.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    What Water Cut-Off Mastic Is Used For\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eWater Cut-Off Mastic is primarily used:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eBeneath \u003ca href=\"\/products\/termination-bar-for-epdm-rubber-roofing\"\u003e\u003cstrong\u003etermination bars\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n      \u003cli\u003eBeneath balustrade fixings on balconies\u003c\/li\u003e\n      \u003cli\u003eAt compression-type wall terminations\u003c\/li\u003e\n      \u003cli\u003eAnywhere the membrane is mechanically fixed and compressed\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIt is not a surface sealant - it is a \u003cstrong\u003ecompression-type sealing agent\u003c\/strong\u003e.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why It’s Critical for Termination Bars\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eWhen a termination bar is fixed through the membrane:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eScrews penetrate the EPDM\u003c\/li\u003e\n      \u003cli\u003eWater can track along the fixings\u003c\/li\u003e\n      \u003cli\u003eMovement over time can create small voids\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eWater Cut-Off Mastic is applied as an 11mm bead beneath the membrane, and when the termination bar is tightened down, it compresses and seals around every fixing point.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Recommended System Practice\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eIt is strongly recommended to use \u003cstrong\u003eWater Cut-Off Mastic beneath compression terminations\u003c\/strong\u003e, and then apply \u003ca href=\"\/products\/classicbond-epdm-lap-sealant-for-rubber-roofing\"\u003e\u003cstrong\u003eLap Sealant\u003c\/strong\u003e\u003c\/a\u003e along the exposed top edge of the termination bar.\u003c\/p\u003e\n    \u003cp\u003eThis two-stage approach provides:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003eInternal compression sealing\u003c\/li\u003e\n      \u003cli\u003eExternal weather protection\u003c\/li\u003e\n    \u003c\/ol\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Application (Overview)\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eEnsure all surfaces are clean and dry\u003c\/li\u003e\n      \u003cli\u003eApply an 11mm bead between substrate and membrane\u003c\/li\u003e\n      \u003cli\u003eInstall termination material\u003c\/li\u003e\n      \u003cli\u003eTighten fixings to create constant compression\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eApprox. 3 linear metres per tube at recommended bead size\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e⚠️ Not suitable for use on insulation\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Product Details\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e ClassicBond Water Cut-Off Mastic\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Butyl-blend compression sealant\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Grey\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eService Temperature:\u003c\/strong\u003e -40°C to 93°C\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Approx. 3 linear metres per tube\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eShelf Life:\u003c\/strong\u003e 1 year (unopened)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eWater Cut-Off Mastic is what actually seals the fixing penetrations beneath a termination bar. Lap sealant protects the edge - but water cut-off seals underneath.\u003c\/p\u003e\n    \u003cp\u003eUsed correctly, it prevents water tracking through screw holes and protects the roof build-up long-term.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56518638698827,"sku":"CB-WCM","price":12.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/water-cut-off-mastic.jpg?v=1773577284"},{"product_id":"classicbond-pro-fleece-reinforced-epdm","title":"Classicbond Pro Fleece-Reinforced EPDM","description":"\u003ch3\u003eHeavy-Duty Commercial EPDM Roofing - 18.58m² Rolls\u003c\/h3\u003e\n\n\u003cp\u003eClassicBond Pro is a \u003cstrong\u003efleece-reinforced EPDM rubber roofing membrane\u003c\/strong\u003e, designed for larger commercial projects, over-roofing applications and high-performance flat roof installations.\u003c\/p\u003e\n\n\u003cp\u003eManufactured using a patented hot-melt process to bond a polyester fleece backing to EPDM sheet membrane, ClassicBond Pro delivers a total thickness of \u003cstrong\u003e3.00mm\u003c\/strong\u003e, creating an extremely tough, durable and versatile roofing system.\u003c\/p\u003e\n\n\u003cp\u003eThis is not \u003cstrong\u003e\u003ca href=\"\/collections\/classicbond-epdm\"\u003estandard EPDM\u003c\/a\u003e\u003c\/strong\u003e - it’s a reinforced upgrade.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Why Choose ClassicBond Pro Over Standard EPDM?\n    \u003cspan style=\"position:absolute; right:16px;\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eClassicBond Pro offers significant advantages over non-reinforced EPDM membranes:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\u003cstrong\u003eFleece reinforcement increases toughness and puncture resistance\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e180% greater tear resistance than comparable non-fleece membranes\u003c\/li\u003e\n      \u003cli\u003e40% greater puncture resistance\u003c\/li\u003e\n      \u003cli\u003eLess prone to shrinkage over time\u003c\/li\u003e\n      \u003cli\u003eSuitable for direct overlay onto many existing substrates\u003c\/li\u003e\n      \u003cli\u003eIdeal for commercial-scale installations\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eBecause it is reinforced, ClassicBond Pro does \u003cstrong\u003enot require mechanical securement (RUSS strip)\u003c\/strong\u003e at:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eWall abutments\u003c\/li\u003e\n      \u003cli\u003eUpstands\u003c\/li\u003e\n      \u003cli\u003ePerimeters on roofs over 100m²\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Designed for Larger Commercial Applications\n    \u003cspan style=\"position:absolute; right:16px;\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e1.52m wide × 12.20m long\u003c\/li\u003e\n      \u003cli\u003eTotal coverage: 18.58m² per roll\u003c\/li\u003e\n      \u003cli\u003e3.00mm overall thickness\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eSupplied in manageable rolls, ideal where:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eLarge quantities must be transported to roof height\u003c\/li\u003e\n      \u003cli\u003eCrane access is limited\u003c\/li\u003e\n      \u003cli\u003eMultiple installers are working\u003c\/li\u003e\n      \u003cli\u003eLogistics matter\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Pre-Applied Seam Tape for Faster Installation\n    \u003cspan style=\"position:absolute; right:16px;\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eClassicBond Pro includes 75mm Pre-Applied Seam Tape (PST):\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eConsistent seam strength\u003c\/li\u003e\n      \u003cli\u003eFaster splicing\u003c\/li\u003e\n      \u003cli\u003eReduced seam error\u003c\/li\u003e\n      \u003cli\u003eIncreased productivity\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e\u003cstrong\u003e34% fewer seams vs bitumen systems\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cp\u003e\u003cstrong\u003eNo hot works required\u003c\/strong\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Ideal for Overlay \u0026amp; Refurbishment\n    \u003cspan style=\"position:absolute; right:16px;\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003eCushions imperfections\u003c\/li\u003e\n      \u003cli\u003eBridges splits\u003c\/li\u003e\n      \u003cli\u003eProtects against abrasion\u003c\/li\u003e\n      \u003cli\u003eSuitable for overlay systems\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIdeal for:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eCommercial refurbishments\u003c\/li\u003e\n      \u003cli\u003eIndustrial buildings\u003c\/li\u003e\n      \u003cli\u003eRetail units\u003c\/li\u003e\n      \u003cli\u003eSchools \u0026amp; public buildings\u003c\/li\u003e\n      \u003cli\u003eBalcony \/ podium decks\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Installation System\n    \u003cspan style=\"position:absolute; right:16px;\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eFully adhered system using:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\u003ca href=\"\/products\/classicbond-epdm-water-based-deck-adhesive\"\u003eWater-Based Adhesive\u003c\/a\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003ca href=\"\/products\/classicbond-pro-pu-deck-adhesive-5-litres\"\u003ePU Deck Adhesive\u003c\/a\u003e\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003eSeams:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-applied seam tape\u003c\/li\u003e\n      \u003cli\u003eEnd laps with \u003ca href=\"\/products\/classicbond-6-epdm-cover-tape\"\u003e6″ Cover Strip\u003c\/a\u003e\n\u003c\/li\u003e\n      \u003cli\u003eIntersections with \u003ca href=\"\/products\/classicbond-9-elastoform-epdm-flashing-tape\"\u003e9″ Elastoform\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px;\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eClassicBond Pro is built for scale.\u003c\/p\u003e\n    \u003cp\u003eOn larger roofs, shrinkage control, seam consistency and puncture resistance matter more than material cost per square metre.\u003c\/p\u003e\n    \u003cp\u003eThe fleece reinforcement adds stability and reduces detailing risk, while the pre-applied seam tape speeds up installation.\u003c\/p\u003e\n    \u003cp\u003eFor commercial installs and overlays, it’s a smarter system than standard EPDM.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56518717047115,"sku":"CB-186","price":570.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/classicbond-pro-fleecebacked-epdm.webp?v=1773577536"},{"product_id":"classicbond-pro-pu-deck-adhesive-5-litres","title":"ClassicBond Pro PU Deck Adhesive 5 Litres","description":"\u003ch3\u003ePolyurethane Adhesive for Fleece-Backed EPDM Roofing\u003c\/h3\u003e\n\n\u003cp\u003eClassicBond Pro PU Deck Adhesive is a \u003cstrong\u003eone-component, moisture-curing polyurethane adhesive\u003c\/strong\u003e designed specifically for bonding \u003ca href=\"\/products\/classicbond-pro-fleece-reinforced-epdm\"\u003e\u003cstrong\u003eClassicBond Pro Fleece Reinforced EPDM\u003c\/strong\u003e\u003c\/a\u003e to a wide range of substrates.\u003c\/p\u003e\n\n\u003cp\u003eRoller-applied and fast curing, it offers a controlled, high-strength bond without the need for spray equipment - making it a preferred option for many contractors working on commercial and refurbishment projects.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Designed for ClassicBond Pro Fleece Reinforced EPDM\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThis adhesive is formulated to bond fleece-backed EPDM membranes directly to:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eConcrete\u003c\/li\u003e\n      \u003cli\u003eSteel decks\u003c\/li\u003e\n      \u003cli\u003ePIR \/ PUR insulation (tissue-faced)\u003c\/li\u003e\n      \u003cli\u003eGRP\u003c\/li\u003e\n      \u003cli\u003eExisting bituminous layers (where suitable)\u003c\/li\u003e\n      \u003cli\u003eOther compatible roof surfaces\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThe fleece backing of ClassicBond Pro allows the polyurethane adhesive to key effectively into the underside of the membrane.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why Contractors Choose PU Adhesive\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eSome installers prefer PU deck adhesive over sprayable bonding systems because:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eIt is roller applied, requiring no spray gun or hose setup\u003c\/li\u003e\n      \u003cli\u003eIt provides controlled, even coverage\u003c\/li\u003e\n      \u003cli\u003eIt avoids overspray risks\u003c\/li\u003e\n      \u003cli\u003eIt suits smaller commercial or detailed installations\u003c\/li\u003e\n      \u003cli\u003eIt offers a strong structural bond once cured\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThe adhesive reacts with atmospheric moisture and typically cures within approximately one hour depending on site conditions.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Application Overview\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eEnsure substrate is clean, dry and free from contaminants\u003c\/li\u003e\n      \u003cli\u003ePour adhesive onto deck surface\u003c\/li\u003e\n      \u003cli\u003eRoll out to create a thin, even coating\u003c\/li\u003e\n      \u003cli\u003eAllow adhesive to react for approximately 10 minutes at 20°C\u003c\/li\u003e\n      \u003cli\u003eLay the membrane into position\u003c\/li\u003e\n      \u003cli\u003eApply firm pressure using a squeegee or roller to consolidate the bond\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eCoverage rates typically range between:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003e1.6 – 2.4 m²\u003c\/strong\u003e per litre depending on surface type\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e\u003cstrong\u003eA 5L container provides up to approximately 22m² coverage\u003c\/strong\u003e under optimal conditions.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Key Technical Details\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e Urethane\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e 3000 cps at 20°C\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Pink\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eShelf Life:\u003c\/strong\u003e 3 months (stored between 5°C and 25°C)\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eContainers must be resealed immediately after use to prevent moisture ingress and premature curing.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Ideal Applications\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eClassicBond Pro PU Adhesive is particularly suited for:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eCommercial roof refurbishments\u003c\/li\u003e\n      \u003cli\u003eOverlays onto suitable existing substrates\u003c\/li\u003e\n      \u003cli\u003eProjects where spray application is impractical\u003c\/li\u003e\n      \u003cli\u003eInstallations requiring controlled adhesive placement\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eSpray systems are fast, but they require setup and careful control.\u003c\/p\u003e\n    \u003cp\u003ePU deck adhesive offers a more controlled approach. For many contractors, especially on mid-sized commercial roofs or detailed installations, roller application provides consistency and confidence - particularly when working with fleece-backed EPDM.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56518764921163,"sku":"CB-PU-Adhesive","price":104.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/classicbond-pro-pu-adhesive.jpg?v=1773577792"},{"product_id":"horizontal-roof-drain-for-epdm-rubber-roofing-systems","title":"Horizontal Roof Drain for EPDM Rubber Roofing Systems","description":"\u003ch3\u003e100mm × 100mm × 500mm Through-Wall EPDM Roof Outlet (Leaf Grate Included)\u003c\/h3\u003e\n\n\u003cp\u003eThe ClassicBond Angled Roof Drain is a heavy-duty through-wall roof outlet designed to safely drain flat EPDM rubber roofs through parapet walls into hoppers, gutters or external drainage systems.\u003c\/p\u003e\n\n\u003cp\u003eThis outlet is used where water cannot drain vertically through the deck and must exit horizontally through a wall - forming one of the most critical waterproofing details on any flat roof.\u003c\/p\u003e\n\n\u003cp\u003eSupplied with a leaf grate, this listing includes the \u003cstrong\u003edrain outlet only\u003c\/strong\u003e. \u003ca href=\"\/products\/classicbond-9-elastoform-epdm-flashing-tape\"\u003e\u003cstrong\u003eFlashing tape\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/classicbond-epdm-rubber-roofing-primer\"\u003e\u003cstrong\u003eprimer\u003c\/strong\u003e\u003c\/a\u003e must be purchased separately. Angled 90° connectors are available separately.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Why Angled Roof Drains Are Critical\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThrough-wall drains (also known as scupper drains or horizontal outlets) are high-risk detailing points. If poorly installed, they can cause:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eWater backing up behind the outlet\u003c\/li\u003e\n      \u003cli\u003eLeaks at the membrane-to-flange junction\u003c\/li\u003e\n      \u003cli\u003eStructural moisture damage inside walls\u003c\/li\u003e\n      \u003cli\u003eLong-term failure of the roof build-up\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eUsing a purpose-designed angled EPDM roof drain significantly reduces these risks when detailed correctly.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Product Construction \u0026amp; Key Features\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThe ClassicBond 90° Angled Roof Drain is manufactured from \u003cstrong\u003eIGOM synthetic rubber\u003c\/strong\u003e and features:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003e90° angled outlet\u003c\/strong\u003e for horizontal discharge\u003c\/li\u003e\n      \u003cli\u003e\u003cstrong\u003e100mm × 100mm internal outlet size\u003c\/strong\u003e\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e500mm outlet length\u003c\/strong\u003e, suitable for thicker external walls\u003c\/li\u003e\n      \u003cli\u003eLarge bonding flange (140mm × 245mm)\u003c\/li\u003e\n      \u003cli\u003eCompatible with 90° shoes and extension pipes\u003c\/li\u003e\n      \u003cli\u003eSupplied with a removable \u003cstrong\u003eleaf guard\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThe flexible EPDM-compatible flange ensures reliable adhesion to EPDM membranes when primed and flashed correctly.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Where This Angled Roof Drain Is Used\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eIdeal for:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eParapet wall drainage\u003c\/li\u003e\n      \u003cli\u003eCommercial flat roofs\u003c\/li\u003e\n      \u003cli\u003ePodium decks\u003c\/li\u003e\n      \u003cli\u003eBalcony roofs\u003c\/li\u003e\n      \u003cli\u003eBox gutters discharging through walls\u003c\/li\u003e\n      \u003cli\u003eRetrofit or refurbishment projects\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eSuitable for use with:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eClassicBond EPDM\u003c\/li\u003e\n      \u003cli\u003eClassicBond Pro Fleece Reinforced EPDM\u003c\/li\u003e\n      \u003cli\u003eOther compatible EPDM membranes\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    Installation Overview (ClassicBond EPDM \u0026amp; ClassicBond Pro)\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eMechanically fix the drain securely into the roof deck\u003c\/li\u003e\n      \u003cli\u003eLeave a 50–75mm bonding area on the flange\u003c\/li\u003e\n      \u003cli\u003eInstall EPDM membrane over the roof\u003c\/li\u003e\n      \u003cli\u003eCut membrane to expose the outlet flange\u003c\/li\u003e\n      \u003cli\u003ePrime the membrane and flange\u003c\/li\u003e\n      \u003cli\u003eInstall uncured EPDM flashing over the flange\u003c\/li\u003e\n      \u003cli\u003eRoll thoroughly to ensure full adhesion\u003c\/li\u003e\n      \u003cli\u003eInsert leaf guard\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eProper flashing detail is essential to prevent water ingress.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative; list-style:none;\"\u003e\n    A Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eHorizontal outlets are unforgiving details. If the membrane isn’t properly sealed to the flange, water will always find its way back in.\u003c\/p\u003e\n    \u003cp\u003eUsing a purpose-made 90° roof drain and detailing it with uncured flashing tape or the recommended detailing materials for your chosen system is the correct approach. Once installed properly, it becomes a secure, long-term drainage solution.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56518823608651,"sku":"CB-Drain-Horizontal","price":26.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/horizontal-drain-for-epdm-rubber-roofs.jpg?v=1773496368"},{"product_id":"sure-edge-kerb-trim","title":"Sure Edge Kerb Trim 2m","description":"\u003ch3\u003euPVC Kerb Edge Trim for EPDM Rubber Roofing\u003c\/h3\u003e\n\n\u003cp\u003eSure Edge Kerb Trim is a purpose-designed uPVC edge trim used to finish flat roof edges where a gutter drip trim is not installed.\u003c\/p\u003e\n\n\u003cp\u003eFeaturing a built-in upstand, it prevents water running off the sides of the roof and directs it towards the gutter edge - improving drainage and overall roof performance.\u003c\/p\u003e\n\n\u003cp\u003eDesigned to work alongside \u003cstrong\u003e\u003ca href=\"\/products\/sure-edge-gutter-drip-trim-2m\"\u003eSure Edge Drip Trim\u003c\/a\u003e\u003c\/strong\u003e, it creates a clean, professional perimeter detail on EPDM and rubber roofing systems.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Where It’s Used\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003eSide edges of flat roofs\u003c\/li\u003e\n      \u003cli\u003eSheds, garden rooms and garages\u003c\/li\u003e\n      \u003cli\u003eExtensions and small flat roof projects\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eInstalled on non-drainage edges to prevent lateral water run-off and guide water towards the gutter edge.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Why Use Kerb Trim\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eKerb trim replaces the need for a traditional timber upstand, providing a faster and more reliable edge detail.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-formed uPVC upstand\u003c\/li\u003e\n      \u003cli\u003ePrevents water running off roof edges\u003c\/li\u003e\n      \u003cli\u003eCompression seal secures membrane edge\u003c\/li\u003e\n      \u003cli\u003eNo exposed fixings through the membrane\u003c\/li\u003e\n      \u003cli\u003eCleaner, more consistent finish\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThis simplifies installation while improving long-term durability and appearance.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Compatibility\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003eEPDM rubber roofing membranes\u003c\/li\u003e\n      \u003cli\u003e\u003ca href=\"\/collections\/classicbond-epdm\"\u003eClassicBond EPDM systems\u003c\/a\u003e\u003c\/li\u003e\n      \u003cli\u003eFleece-backed EPDM\u003c\/li\u003e\n      \u003cli\u003eFully adhered flat roof systems\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eDesigned to securely finish membrane edges while maintaining a watertight seal.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Installation Overview\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eInstall EPDM membrane with minimum 100mm overhang\u003c\/li\u003e\n      \u003cli\u003ePosition trim so compression seal engages membrane\u003c\/li\u003e\n      \u003cli\u003eFix through pre-drilled holes using supplied PolyTop pins\u003c\/li\u003e\n      \u003cli\u003eAllow approx. 25mm expansion gap between lengths\u003c\/li\u003e\n      \u003cli\u003eInstall joining clips and corners where required\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eSuitable for both professional installers and competent DIY users.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Specifications\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003eLength: 2 metres\u003c\/li\u003e\n      \u003cli\u003eHeight: 100mm\u003c\/li\u003e\n      \u003cli\u003eMaterial: Heavy-duty uPVC\u003c\/li\u003e\n      \u003cli\u003eColours: Black \/ Anthracite Grey \/ White\u003c\/li\u003e\n      \u003cli\u003eIncludes: PolyTop pins \u0026amp; joining clip\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003e\u003cstrong\u003e\u003ca href=\"\/products\/sure-edge-external-kerb-corner\"\u003eSure Edge external corners\u003c\/a\u003e\u003c\/strong\u003e are sold separately.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Finish \u0026amp; Appearance\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eAvailable in three popular colours to match modern fascias, windows and doors:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eBlack\u003c\/li\u003e\n      \u003cli\u003eAnthracite Grey\u003c\/li\u003e\n      \u003cli\u003eWhite\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eProvides a clean, architectural finish to flat roof edges.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eKerb trim isn’t just for looks - it controls water and finishes the roof properly.\u003c\/p\u003e\n    \u003cp\u003eIt’s quicker and more consistent than building timber upstands, and once installed, it gives a far cleaner and more professional result.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Black","offer_id":56523981193547,"sku":"SE-KERB-2M-B","price":19.26,"currency_code":"GBP","in_stock":true},{"title":"Anthracite Grey","offer_id":56523981226315,"sku":"SE-KERB-2M-A","price":19.26,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56523981259083,"sku":"SE-KERB-2M-W","price":19.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/sure-edge-kerb-edge-roof-trim.jpg?v=1773691847"},{"product_id":"sure-edge-gutter-drip-trim-2m","title":"Sure Edge Gutter Drip Trim 2m","description":"\u003ch3\u003e2-Part EPDM Rubber Roofing Gutter Drip Edge Trim (2m)\u003c\/h3\u003e\n\n\u003cp\u003eSure Edge Gutter Drip Trim is a premium 2-part uPVC edge trim designed to secure EPDM rubber roofing membranes along the gutter edge of flat roofs.\u003c\/p\u003e\n\n\u003cp\u003eIt clamps the membrane securely while forming a stepped drip detail that directs water cleanly into the gutter - preventing water tracking behind the fascia or beneath the membrane.\u003c\/p\u003e\n\n\u003cp\u003eWidely used by professional installers, the Sure Edge system delivers a strong, consistent edge detail with a clean, high-quality finish.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Why Drip Trim Matters\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThe gutter edge is the most exposed part of any flat roof. Without a proper drip detail:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eWater can track behind the fascia\u003c\/li\u003e\n      \u003cli\u003eDeck edges can become saturated\u003c\/li\u003e\n      \u003cli\u003eWind can lift the membrane edge\u003c\/li\u003e\n      \u003cli\u003eWater may run down the face of the building\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThis trim prevents these issues by clamping the membrane securely and directing water into the gutter system.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    2-Part Clamping System\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThe system consists of two interlocking components:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBack plate:\u003c\/strong\u003e fixed to timber batten (10mm thick × 50mm height)\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFront plate:\u003c\/strong\u003e clamps membrane in place (7mm thick × 75mm height)\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThis creates a strong mechanical bond, securing the membrane without relying solely on adhesive.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Installation Overview\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003col\u003e\n      \u003cli\u003eFix a 25×50mm timber batten to the fascia, level with the roof deck\u003c\/li\u003e\n      \u003cli\u003eInstall the back plate onto the batten\u003c\/li\u003e\n      \u003cli\u003eDress the EPDM membrane over the back plate\u003c\/li\u003e\n      \u003cli\u003ePosition the front plate over the membrane\u003c\/li\u003e\n      \u003cli\u003eSecure using supplied 50mm PolyTop pins\u003c\/li\u003e\n      \u003cli\u003eTrim excess membrane below the back plate\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eThis creates a secure, consistent edge detail suitable for both trade and DIY installations.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Compatibility\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003eEPDM rubber roofing membranes\u003c\/li\u003e\n      \u003cli\u003e\u003ca href=\"\/collections\/classicbond-epdm\"\u003eClassicBond EPDM systems\u003c\/a\u003e\u003c\/li\u003e\n      \u003cli\u003e\u003ca href=\"\/collections\/classicbond-pro\"\u003eClassicBond Pro (fleece-backed EPDM)\u003c\/a\u003e\u003c\/li\u003e\n      \u003cli\u003eFleece-backed EPDM\u003c\/li\u003e\n      \u003cli\u003eFully adhered flat roofing systems\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eWorks alongside \u003cstrong\u003e\u003ca href=\"\/products\/sure-edge-kerb-trim\"\u003eSure Edge Kerb Trim\u003c\/a\u003e\u003c\/strong\u003e to complete the full roof perimeter system.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Finish \u0026amp; Included Components\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eAvailable in colours to match modern fascias and rooflines:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eBlack\u003c\/li\u003e\n      \u003cli\u003eAnthracite Grey\u003c\/li\u003e\n      \u003cli\u003eWhite\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eEach trim includes:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-drilled fixing holes\u003c\/li\u003e\n      \u003cli\u003e50mm colour-matched PolyTop pins\u003c\/li\u003e\n      \u003cli\u003eJoining clip\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eJoining clips conceal expansion gaps and maintain a clean, continuous finish.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Specifications\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003eLength: 2.0 metres\u003c\/li\u003e\n      \u003cli\u003eBack plate: 10mm thick × 50mm height\u003c\/li\u003e\n      \u003cli\u003eFront plate: 7mm thick × 75mm height\u003c\/li\u003e\n      \u003cli\u003eMaterial: Heavy-duty uPVC\u003c\/li\u003e\n      \u003cli\u003eIncludes: PolyTop pins \u0026amp; joining clip\u003c\/li\u003e\n      \u003cli\u003eBrand: Sure Edge\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eInternal and external corners are sold separately.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Roofer’s Perspective\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThe gutter edge is where most flat roofs fail first. If it’s not detailed properly, water will get behind the fascia and cause problems over time.\u003c\/p\u003e\n    \u003cp\u003eA proper 2-part drip trim like this gives a secure mechanical fixing and a clean drip detail. It’s far more reliable than improvised timber solutions and finishes the roof properly.\u003c\/p\u003e\n    \u003cp\u003eIf you’re installing EPDM correctly, this isn’t optional - it’s a key part of the system.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Black","offer_id":56525289128267,"sku":"SE-DRIP-2M-B","price":19.26,"currency_code":"GBP","in_stock":true},{"title":"Anthracite Grey","offer_id":56525289161035,"sku":"SE-DRIP-2M-A","price":19.26,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":56525289193803,"sku":"SE-DRIP-2M-W","price":19.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/sure-edge-2-part-gutter-drip-trim.jpg?v=1773692245"},{"product_id":"mini-roller-for-epdm","title":"Mini Roller for EPDM Adhesives – 100mm (2 Heads)","description":"\u003ch3 data-end=\"215\" data-start=\"142\"\u003eCompact roller for applying contact adhesive and other roofing adhesives.\u003c\/h3\u003e\n\u003cp data-end=\"385\" data-start=\"217\"\u003eThis \u003cstrong data-end=\"248\" data-start=\"222\"\u003e100mm (4\") mini roller\u003c\/strong\u003e is ideal for applying \u003cstrong data-end=\"303\" data-start=\"271\"\u003e\u003ca href=\"products\/classicbond-epdm-contact-adhesive\"\u003eClassicBond contact adhesive\u003c\/a\u003e\u003c\/strong\u003e to deck perimeters, upstands and detail areas prior to installing EPDM membranes.\u003c\/p\u003e\n\u003cp data-end=\"528\" data-start=\"387\"\u003eSupplied with \u003cstrong data-end=\"431\" data-start=\"401\"\u003e2 roller heads and 1 frame\u003c\/strong\u003e, it provides controlled application in tighter sections where larger rollers are less practical.\u003c\/p\u003e\n\u003ch2 data-start=\"535\" data-end=\"556\"\u003eWhat It’s Used For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"560\" data-end=\"599\"\u003eApplying ClassicBond contact adhesive\u003c\/li\u003e\n\u003cli data-start=\"602\" data-end=\"642\"\u003eCoating upstands and vertical surfaces\u003c\/li\u003e\n\u003cli data-start=\"645\" data-end=\"695\"\u003ePerimeter detailing before membrane installation\u003c\/li\u003e\n\u003cli data-start=\"698\" data-end=\"760\"\u003eApplying other roofing adhesives where precision is required\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuitable for EPDM and similar adhesive-based roofing systems.\u003c\/p\u003e\n\u003ch2 data-start=\"830\" data-end=\"846\"\u003eSpecification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"850\" data-end=\"869\"\u003eWidth: 100mm (4\")\u003c\/li\u003e\n\u003cli data-start=\"872\" data-end=\"917\"\u003eIncludes: 1 frame \u0026amp; handle + 2 roller heads\u003c\/li\u003e\n\u003cli data-start=\"920\" data-end=\"971\"\u003eUse: Contact adhesive and other roofing adhesives\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"978\" data-end=\"1074\"\u003eA simple but essential tool for clean and controlled adhesive application on EPDM installations.\u003c\/p\u003e\n\u003cp data-start=\"978\" data-end=\"1074\"\u003e \u003c\/p\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56745364783435,"sku":"TL-Mini-Roller","price":3.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/mini-roller-epdm.jpg?v=1774184957"},{"product_id":"penny-roller-for-epdm-flashing-tape","title":"Penny Roller for EPDM \u0026 Single Ply Membranes","description":"\u003ch3 data-start=\"122\" data-end=\"176\"\u003eDetail Roller for Corners, Angles \u0026amp; Flashing Tapes\u003c\/h3\u003e\n\u003cp data-start=\"178\" data-end=\"336\"\u003eThis \u003cstrong data-start=\"183\" data-end=\"207\"\u003epenny roller (200mm)\u003c\/strong\u003e is used to apply firm, targeted pressure when installing membranes and flashing tapes into tight angles and right-angle details.\u003c\/p\u003e\n\u003cp data-start=\"338\" data-end=\"442\"\u003eIdeal for working tape into wall abutments, internal corners and creases where full contact is critical.\u003c\/p\u003e\n\u003cp data-start=\"444\" data-end=\"506\"\u003eCompatible with \u003cstrong data-start=\"460\" data-end=\"480\"\u003eClassicBond EPDM\u003c\/strong\u003e and \u003cstrong data-start=\"485\" data-end=\"497\"\u003eResitrix\u003c\/strong\u003e systems.\u003c\/p\u003e\n\u003ch2 data-start=\"513\" data-end=\"534\"\u003eWhat It’s Used For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"538\" data-end=\"585\"\u003eCompressing flashing tape into wall abutments\u003c\/li\u003e\n\u003cli data-start=\"588\" data-end=\"633\"\u003eWorking membrane into right-angle junctions\u003c\/li\u003e\n\u003cli data-start=\"636\" data-end=\"679\"\u003eApplying pressure to seam and cover tapes\u003c\/li\u003e\n\u003cli data-start=\"682\" data-end=\"728\"\u003eEnsuring full adhesion in tight detail areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-start=\"735\" data-end=\"752\"\u003eWhy It Matters\u003c\/h2\u003e\n\u003cp data-start=\"754\" data-end=\"848\"\u003eTapes and membranes must be properly compressed into corners to avoid lifting and trapped air.\u003c\/p\u003e\n\u003cp data-start=\"850\" data-end=\"865\"\u003eA penny roller:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"869\" data-end=\"912\"\u003eApplies controlled, concentrated pressure\u003c\/li\u003e\n\u003cli data-start=\"915\" data-end=\"950\"\u003eImproves adhesion at detail areas\u003c\/li\u003e\n\u003cli data-start=\"953\" data-end=\"992\"\u003eHelps eliminate voids in tight angles\u003c\/li\u003e\n\u003cli data-start=\"995\" data-end=\"1032\"\u003eSupports long-term seam performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-start=\"1039\" data-end=\"1055\"\u003eSpecification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"1059\" data-end=\"1073\"\u003eWidth: 200mm\u003c\/li\u003e\n\u003cli data-start=\"1076\" data-end=\"1100\"\u003eRoller Material: Brass\u003c\/li\u003e\n\u003cli data-start=\"1103\" data-end=\"1125\"\u003eHandle: Wooden shaft\u003c\/li\u003e\n\u003cli data-start=\"1128\" data-end=\"1146\"\u003eSupplied: 1 unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56745552216395,"sku":"TL-Penny-Roller","price":18.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/epdm-penny-roller.jpg?v=1774471086"},{"product_id":"professional-epdm-roofing-tool-kit","title":"Professional EPDM Roofing Tool Kit","description":"\u003ch3\u003eComplete Installation Kit for EPDM \u0026amp; Rubber Roofing Systems\u003c\/h3\u003e\n\n\u003cp\u003eThis \u003cstrong\u003eProfessional EPDM Tool Kit\u003c\/strong\u003e contains the core tools required for installing EPDM rubber roofing systems to a professional standard.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for experienced installers, this kit covers seam compression, adhesive application and precision detailing across full roof installations.\u003c\/p\u003e\n\n\u003cp\u003eSuitable for use with \u003cstrong\u003e\u003ca href=\"collections\/classicbond-epdm\"\u003eClassicBond EPDM\u003c\/a\u003e\u003c\/strong\u003e, \u003cstrong\u003e\u003ca href=\"collections\/resitrix%C2%AE\"\u003eResitrix\u003c\/a\u003e\u003c\/strong\u003e, and similar rubber roofing systems.\u003c\/p\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    What’s Included\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSilicone Seam Roller\u003c\/strong\u003e – Heavy-duty roller for compressing areas bonded with contact adhesive and flashing or seam tapes\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePenny Roller\u003c\/strong\u003e – For working membrane and tapes into right angles and tight details\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e9\" Roller Set \u0026amp; Tray\u003c\/strong\u003e – For applying water-based deck adhesive\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMini Roller\u003c\/strong\u003e – For applying contact adhesive to perimeters and upstands\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHarris Scissors\u003c\/strong\u003e – Heavy-duty scissors for cutting EPDM cleanly\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePaint Brush\u003c\/strong\u003e – For applying primer to seam and flashing areas\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Why This Kit?\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eProfessional EPDM installation relies on:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eCorrect adhesive coverage\u003c\/li\u003e\n      \u003cli\u003eProper seam compression\u003c\/li\u003e\n      \u003cli\u003eAccurate detail work\u003c\/li\u003e\n      \u003cli\u003eClean membrane cutting\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003eThis kit ensures you have the right grade of tools for reliable adhesion and long-term seam performance.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"margin-bottom:12px; border:1px solid #333; border-radius:10px; background:#1a1a1a; overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer; font-weight:700; padding:16px 48px 16px 16px; font-size:18px; position:relative;\"\u003e\n    Summary\n    \u003cspan style=\"position:absolute; right:16px; top:50%; transform:translateY(-50%);\"\u003e▸\u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv style=\"padding:16px; border-top:1px solid #333;\"\u003e\n    \u003cp\u003eThe Professional EPDM Roofing Tool Kit provides the essential tools required for installing rubber roofing systems correctly. Built for installers who require durable, purpose-specified tools across the full installation process.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56745572860235,"sku":"TL-Pro-Tool-Kit","price":54.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/Pro-epdm-tool-kit.jpg?v=1774471437"},{"product_id":"9-roller-tray-for-epdm-adhesive","title":"9\" Roller \u0026 Tray for EPDM Deck Adhesive","description":"\u003ch3 data-start=\"161\" data-end=\"214\"\u003eRoller Set for Applying Water-Based EPDM Adhesive\u003c\/h3\u003e\n\u003cp data-start=\"216\" data-end=\"343\"\u003eThis \u003cstrong data-start=\"221\" data-end=\"247\"\u003e9\" roller and tray set\u003c\/strong\u003e is designed for applying water-based deck adhesive when installing EPDM rubber roofing systems.\u003c\/p\u003e\n\u003cp data-start=\"345\" data-end=\"493\"\u003eThe wider roller allows fast, even coverage across larger roof areas, helping achieve consistent adhesive distribution prior to laying the membrane.\u003c\/p\u003e\n\u003cp data-start=\"495\" data-end=\"566\"\u003eSuitable for use with ClassicBond and other EPDM water-based adhesives.\u003c\/p\u003e\n\u003ch2 data-start=\"573\" data-end=\"594\"\u003eWhat It’s Used For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"598\" data-end=\"634\"\u003eApplying water-based deck adhesive\u003c\/li\u003e\n\u003cli data-start=\"637\" data-end=\"690\"\u003eCoating timber decks prior to membrane installation\u003c\/li\u003e\n\u003cli data-start=\"693\" data-end=\"744\"\u003eEven adhesive distribution across flat roof areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-start=\"1064\" data-end=\"1080\"\u003eSpecification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"1084\" data-end=\"1102\"\u003eRoller Width: 9\"\u003c\/li\u003e\n\u003cli data-start=\"1105\" data-end=\"1146\"\u003eIncludes: Roller frame, sleeve and tray\u003c\/li\u003e\n\u003cli data-start=\"1149\" data-end=\"1186\"\u003eUse: Water-based EPDM deck adhesive\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56745594061131,"sku":"TL-Roller-Set-9","price":4.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/epdm-roller.jpg?v=1774471927"},{"product_id":"scissors-for-epdm-roofing","title":"Scissors for EPDM Roofing","description":"\u003ch3 data-start=\"99\" data-end=\"168\"\u003eHeavy-duty scissors for cutting EPDM membrane cleanly and accurately.\u003c\/h3\u003e\n\u003cp data-start=\"170\" data-end=\"357\"\u003eThese \u003cstrong data-start=\"176\" data-end=\"199\"\u003eTaskmaster scissors\u003c\/strong\u003e are ideal for trimming EPDM rubber roofing during installation. Sharp and durable, they provide controlled cuts through membrane without snagging or tearing.\u003c\/p\u003e\n\u003cp data-start=\"359\" data-end=\"414\"\u003eSuitable for use on ClassicBond and other EPDM systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"423\" data-end=\"448\"\u003eHeavy-duty construction\u003c\/li\u003e\n\u003cli data-start=\"451\" data-end=\"489\"\u003eSharp blades for clean membrane cuts\u003c\/li\u003e\n\u003cli data-start=\"492\" data-end=\"544\"\u003eIdeal for trimming corners, edges and detail areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA simple but essential tool for accurate EPDM installation.\u003c\/p\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56745597501771,"sku":"TL-Scissors","price":3.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/epdm-scissors.jpg?v=1774472169"},{"product_id":"professional-silicone-seam-roller","title":"Professional Silicone Seam Roller","description":"\u003cp data-start=\"157\" data-end=\"215\"\u003eHeavy-duty seam roller for EPDM and membrane installation.\u003c\/p\u003e\n\u003cp data-start=\"217\" data-end=\"353\"\u003eThis \u003cstrong data-start=\"222\" data-end=\"259\"\u003eprofessional silicone seam roller\u003c\/strong\u003e is designed for compressing EPDM membranes and EPDM tapes to ensure secure, long-lasting adhesion.\u003c\/p\u003e\n\u003cp data-start=\"355\" data-end=\"521\"\u003eBuilt with a durable silicone roller head and heavy-duty bearings, it delivers consistent pressure when working contact adhesive bonded areas, splice tapes and flashing tapes.\u003c\/p\u003e\n\u003cp data-start=\"523\" data-end=\"599\"\u003eSuitable for \u003cstrong data-start=\"536\" data-end=\"556\"\u003eClassicBond EPDM\u003c\/strong\u003e, \u003cstrong data-start=\"558\" data-end=\"570\"\u003eResitrix\u003c\/strong\u003e, and other membrane systems.\u003c\/p\u003e\n\u003ch2 data-start=\"606\" data-end=\"627\"\u003eWhat It’s Used For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"631\" data-end=\"670\"\u003eCompressing EPDM seams and lap joints\u003c\/li\u003e\n\u003cli data-start=\"673\" data-end=\"721\"\u003eApplying pressure to flashing and splice tapes\u003c\/li\u003e\n\u003cli data-start=\"724\" data-end=\"763\"\u003eRolling contact adhesive bonded areas to ensure complete bonding\u003c\/li\u003e\n\u003cli data-start=\"766\" data-end=\"806\"\u003eEnsuring full tape-to-membrane contact\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-start=\"1128\" data-end=\"1144\"\u003eSpecification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"1148\" data-end=\"1168\"\u003eRoller Width: 45mm\u003c\/li\u003e\n\u003cli data-start=\"1171\" data-end=\"1194\"\u003eRoller Diameter: 35mm\u003c\/li\u003e\n\u003cli data-start=\"1197\" data-end=\"1229\"\u003eMaterial: Silicone roller head\u003c\/li\u003e\n\u003cli data-start=\"1232\" data-end=\"1264\"\u003eHandle: Ergonomic cushion grip\u003c\/li\u003e\n\u003cli data-start=\"1267\" data-end=\"1289\"\u003eBearings: Heavy duty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"Default Title","offer_id":56745613820235,"sku":"TL-Silicon-Seam-Roller","price":21.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/epdm-seam-roller-2.jpg?v=1774472523"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/collections\/classicbond-pro-epdm-collection-hero-banner.jpg?v=1775240646","url":"https:\/\/theflatroofingshop.co.uk\/collections\/classicbond-pro.oembed","provider":"The Flat Roofing Shop","version":"1.0","type":"link"}