{"product_id":"classicbond-epdm-pipe-box-pocket-for-rubber-roofing","title":"ClassicBond EPDM Pipe Box Pocket for Rubber Roofing","description":"\u003cp data-start=\"770\" data-end=\"830\"\u003e\u003cstrong data-start=\"770\" data-end=\"830\"\u003eProfessional Waterproofing for Awkward Roof Penetrations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"832\" data-end=\"999\"\u003eThe ClassicBond EPDM Pipe Box Pocket is designed to weather complex or awkward penetrations on EPDM rubber roofing, where a standard pipe boot cannot be installed.\u003c\/p\u003e\n\u003cp data-start=\"1001\" data-end=\"1269\"\u003eIt creates a controlled containment area (“pocket”) around the penetration, allowing the detail to be sealed securely using EPDM primer and pourable sealer. The result is a watertight, stress-free seal that protects one of the most vulnerable areas of a flat roof.\u003c\/p\u003e\n\u003ch2 data-end=\"1308\" data-start=\"1276\"\u003eWhen to Use a Pipe Box Pocket\u003c\/h2\u003e\n\u003cp data-end=\"1341\" data-start=\"1310\"\u003eA pipe box pocket is used when:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1396\" data-start=\"1345\"\u003eA pipe or penetration sits tight against a wall\u003c\/li\u003e\n\u003cli data-end=\"1433\" data-start=\"1399\"\u003eMultiple pipes exit close together\u003c\/li\u003e\n\u003cli data-end=\"1491\" data-start=\"1436\"\u003eThe penetration cannot be slipped over with a pipe boot\u003c\/li\u003e\n\u003cli data-end=\"1529\" data-start=\"1494\"\u003eThe detail is irregular or boxed in\u003c\/li\u003e\n\u003cli data-end=\"1562\" data-start=\"1532\"\u003eThe obstacle cannot be removed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1728\" data-start=\"1564\"\u003eUnlike a pipe boot, the pipe box pocket can be separated and reconnected, allowing it to be installed around existing obstructions.\u003c\/p\u003e\n\u003cp data-end=\"1796\" data-start=\"1730\"\u003eThis makes it the stress-free solution for awkward EPDM detailing.\u003c\/p\u003e\n\u003ch2 data-end=\"2355\" data-start=\"2337\"\u003eAvailable Sizes\u003c\/h2\u003e\n\u003cp data-end=\"2410\" data-start=\"2357\"\u003eThe ClassicBond EPDM Pipe Box Pocket is available in:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"2431\" data-start=\"2414\"\u003e\u003cstrong data-end=\"2431\" data-start=\"2414\"\u003e100mm × 100mm\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-end=\"2451\" data-start=\"2434\"\u003e\u003cstrong data-end=\"2451\" data-start=\"2434\"\u003e150mm × 150mm\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-end=\"2471\" data-start=\"2454\"\u003e\u003cstrong data-end=\"2471\" data-start=\"2454\"\u003e200mm × 200mm\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2583\" data-start=\"2473\"\u003eChoose the size that allows a \u003cstrong data-end=\"2529\" data-start=\"2503\"\u003eminimum 25mm clearance\u003c\/strong\u003e between the penetration and the inside of the pocket.\u003c\/p\u003e\n\u003ch2 data-end=\"2640\" data-start=\"2590\"\u003eHow the Pipe Box Pocket Is Installed (Overview)\u003c\/h2\u003e\n\u003cp data-end=\"2684\" data-start=\"2645\"\u003eEnsure all surfaces are clean and dry\u003c\/p\u003e\n\u003col\u003e\n\u003cli data-end=\"2741\" data-start=\"2688\"\u003ePosition the pipe box pocket around the penetration\u003c\/li\u003e\n\u003cli data-end=\"2837\" data-start=\"2745\"\u003eMaintain at least 25mm clearance from the penetration to the inside wall of the pocket\u003c\/li\u003e\n\u003cli data-end=\"2871\" data-start=\"2841\"\u003eMark around the outside edge\u003c\/li\u003e\n\u003cli data-end=\"2938\" data-start=\"2875\"\u003eApply a continuous bead of Lap Sealant beneath the flange\u003c\/li\u003e\n\u003cli data-end=\"2981\" data-start=\"2942\"\u003ePress the pocket firmly into position\u003c\/li\u003e\n\u003cli data-end=\"3075\" data-start=\"2985\"\u003eApply EPDM Primer to all internal surfaces (membrane, penetration, inside of pocket)\u003c\/li\u003e\n\u003cli data-end=\"3106\" data-start=\"3079\"\u003eAllow primer to flash off\u003c\/li\u003e\n\u003cli data-end=\"3162\" data-start=\"3110\"\u003eFill the pocket using one-part pourable sealer\u003c\/li\u003e\n\u003cli data-end=\"3203\" data-start=\"3167\"\u003eProtect from moisture while curing\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-end=\"3277\" data-start=\"3205\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp data-end=\"3277\" data-start=\"3205\"\u003eIf the pipe sits extremely close to a wall, one side of the pipe box pocket can be carefully trimmed to allow it to sit tight against the wall.\u003c\/p\u003e\n\u003cp data-start=\"448\" data-end=\"583\"\u003eThe cut edge must then be securely bonded to the wall using \u003cstrong data-start=\"508\" data-end=\"542\"\u003e3″ splice tape and EPDM primer\u003c\/strong\u003e before the pourable sealer is installed.\u003c\/p\u003e\n\u003cp data-start=\"585\" data-end=\"774\"\u003eAs an alternative, \u003cstrong data-start=\"604\" data-end=\"619\"\u003eLap Sealant\u003c\/strong\u003e may be used, but the pocket should be held firmly in place with weight on either side until the sealant has fully cured to prevent movement or separation.\u003c\/p\u003e\n\u003ch2 data-start=\"3284\" data-end=\"3310\"\u003eWhat You Will Also Need\u003c\/h2\u003e\n\u003cp data-start=\"3312\" data-end=\"3362\"\u003eTo complete this detail properly you will require:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"3366\" data-end=\"3393\"\u003e\u003cstrong data-start=\"3366\" data-end=\"3393\"\u003eClassicBond EPDM Primer\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-start=\"3396\" data-end=\"3411\"\u003e\u003cstrong data-start=\"3396\" data-end=\"3411\"\u003eLap Sealant\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-start=\"3414\" data-end=\"3433\"\u003e\u003cstrong data-start=\"3414\" data-end=\"3433\"\u003ePourable Sealer\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-start=\"3436\" data-end=\"3477\"\u003eScrub pad or brush for primer application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"3479\" data-end=\"3524\"\u003eThese items are not included with the pocket.\u003c\/p\u003e\n\u003ch2 data-start=\"3929\" data-end=\"3947\"\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"3951\" data-end=\"3998\"\u003e\n\u003cstrong data-start=\"3951\" data-end=\"3963\"\u003eProduct:\u003c\/strong\u003e ClassicBond EPDM Pipe Box Pocket\u003c\/li\u003e\n\u003cli data-start=\"4001\" data-end=\"4030\"\u003e\n\u003cstrong data-start=\"4001\" data-end=\"4014\"\u003eMaterial:\u003c\/strong\u003e Flexible EPDM\u003c\/li\u003e\n\u003cli data-start=\"4033\" data-end=\"4083\"\u003e\n\u003cstrong data-start=\"4033\" data-end=\"4041\"\u003eUse:\u003c\/strong\u003e Waterproofing awkward roof penetrations\u003c\/li\u003e\n\u003cli data-start=\"4086\" data-end=\"4141\"\u003e\n\u003cstrong data-start=\"4086\" data-end=\"4102\"\u003eApplication:\u003c\/strong\u003e Used with primer and pourable sealer\u003c\/li\u003e\n\u003cli data-start=\"4144\" data-end=\"4186\"\u003e\n\u003cstrong data-start=\"4144\" data-end=\"4164\"\u003eSizes Available:\u003c\/strong\u003e 100mm, 150mm, 200mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-start=\"4193\" data-end=\"4218\"\u003eA Roofer’s Perspective\u003c\/h2\u003e\n\u003cp data-start=\"4220\" data-end=\"4350\"\u003ePipe box pockets are used when a pipe boot simply won’t work. They’re not for standard penetrations - they’re for the tricky ones.\u003c\/p\u003e\n\u003cp data-start=\"4352\" data-end=\"4492\"\u003eInstalled properly with primer and pourable sealer, they turn a potentially weak, messy detail into a secure, long-term waterproof solution.\u003c\/p\u003e\n\u003ch3 data-start=\"4499\" data-end=\"4510\"\u003eSummary\u003c\/h3\u003e\n\u003cp data-start=\"4512\" data-end=\"4766\"\u003eThe ClassicBond EPDM Pipe Box Pocket is the correct solution for sealing awkward penetrations on EPDM rubber roofs. When used with EPDM primer and pourable sealer, it provides a reliable, watertight finish where standard flashing methods aren’t suitable.\u003c\/p\u003e\n\u003cp data-start=\"4768\" data-end=\"4818\"\u003eIf you can’t use a pipe boot, this is the answer.\u003c\/p\u003e","brand":"The Flat Roofing Shop","offers":[{"title":"100mm x 100mm","offer_id":56507803730251,"sku":"CB-PipeBoxPocket-100x100","price":36.0,"currency_code":"GBP","in_stock":true},{"title":"150mm x 150mm","offer_id":56507803763019,"sku":"CB-PipeBoxPocket-150x150","price":42.0,"currency_code":"GBP","in_stock":true},{"title":"200mm x 200mm","offer_id":56507803795787,"sku":"CB-PipeBoxPocket-200x200","price":45.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4054\/9451\/files\/epdm-pipe-box-pocket.jpg?v=1773569015","url":"https:\/\/theflatroofingshop.co.uk\/products\/classicbond-epdm-pipe-box-pocket-for-rubber-roofing","provider":"The Flat Roofing Shop","version":"1.0","type":"link"}